| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This enables installation of notmuch-emacs-mua.desktop
|
|
|
|
|
|
|
|
|
|
The sphinx-doc include directive does not have the ability to include
files from the build tree, so we replace the include with reading the
files in conf.py. The non-trivial downside of this is that the emacs
docstrings are now defined for every rst source file. They are
namespaced with docstring::, so hopefully there will not be any
surprises. One thing that is noticable is a small (absolute) time
penalty in running sphinx-doc.
|
|
The notmuch2 CFFI-based Python interface is not buildable unless
python3 dev package and python3 setuptools are installed.
Check that these exist in configure (and disable notmuch2 bindings
build if not) so that build of these bindings don't fail when make(1)
is executed.
|
|
Before this change, `load-prefer-newer' was ignored.
Set NOERROR and MUST-SUFFIX arguments of `load' to t, and NOSUFFIX
argument to nil, to preserve the behaviour of the deleted `let' form.
|
|
|
|
This is a simple hack to enable out-of-tree builds, a concern raised
by Tomi in id:m24kzjib9a.fsf@guru.guru-group.fi
This change at least enables "make check" to complete without error,
but I'm sure it could be improved. I am not expert enough in
setuptools to know how.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Amended by db per id:87d06usa31.fsf@powell.devork.be
|
|
json_check_nodes.py exists in source tree, not in out of tree
build tree. Added -B to the execution so source tree is not
"polluted" by a .pyc file when json_check_nodes.py is executed.
When creating run_emacs.sh make it load .elc files from out of
tree build tree, not from source tree if such files existed.
If existed, those may be outdated, or even created by some other
emacs than the one that was used to build .elc files in out of
tree build dir.
|
|
As recommended by the byte-compiler.
|
|
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
This change means we can support "notmuch show --decrypt=true" for
S/MIME encrypted messages, resolving several outstanding broken tests,
including all the remaining S/MIME protected header examples.
We do not yet handle indexing the cleartext of S/MIME encrypted
messages, though.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
In the two places where _notmuch_crypto_decrypt handles
multipart/encrypted messages (PGP/MIME), we should also handle PKCS#7
envelopedData (S/MIME).
This is insufficient for fully handling S/MIME encrypted data because
_notmuch_crypto_decrypt isn't yet actually invoked for envelopedData
parts, but that will happen in the following changes.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
As we prepare to handle S/MIME-encrypted PKCS#7 EnvelopedData (which
is not multipart), we don't want to be limited to passing only
GMimeMultipartEncrypted MIME parts to _notmuch_crypto_decrypt.
There is no functional change here, just a matter of adjusting how we
pass arguments internally.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
When composing a reply, no one wants to see this line in the proposed
message:
Non-text part: application/pkcs7-mime
So we hide it, the same way we hide PGP/MIME cruft.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Until we did PKCS#7 unwrapping, no leaf MIME part could have a child.
Now, we treat the unwrapped MIME part as the child of the PKCS#7
SignedData object. So in that case, we want to show it instead of
deliberately omitting the content.
This fixes the test of the protected subject in
id:smime-onepart-signed@protected-headers.example.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Unwrap a PKCS#7 SignedData part unconditionally when the cli is
traversing the MIME tree, and return it as a "child" of what would
otherwise be a leaf in the tree.
Unfortunately, this also breaks the JSON output. We will fix that
next.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
We don't handle them correctly yet, but we can at least mark them as
being encrypted.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
When we are indexing, we should treat SignedData parts the same way
that we treat a multipart object, indexing the wrapped part as a
distinct MIME object.
Unfortunately, this means doing some sort of cryptographic
verification whose results we throw away, because GMime doesn't offer
us any way to unwrap without doing signature verification.
I've opened https://github.com/jstedfast/gmime/issues/67 to request
the capability from GMime but for now, we'll just accept the
additional performance hit.
As we do this indexing, we also apply the "signed" tag, by analogy
with how we handle multipart/signed messages. These days, that kind
of change should probably be done with a property instead, but that's
a different set of changes. This one is just for consistency.
Note that we are currently *only* handling signedData parts, which are
basically clearsigned messages. PKCS#7 parts can also be
envelopedData and authEnvelopedData (which are effectively encryption
layers), and compressedData (which afaict isn't implemented anywhere,
i've never encountered it). We're laying the groundwork for indexing
these other S/MIME types here, but we're only dealing with signedData
for now.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
We already report the minimum version for Glib, zlib, and Xapian
development libraries. For consistency, report it for GMime as well.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
When checking cryptographic signatures, Notmuch relies on GMime to
tell it whether the certificate that signs a message has a valid User
ID or not.
If the User ID is not valid, then notmuch does not report the signer's
User ID to the user. This means that the consumer of notmuch's
cryptographic summary of a message (or of its protected headers) can
be confident in relaying the reported identity to the user.
However, some versions of GMime before 3.2.7 cannot report Certificate
validity for X.509 certificates. This is resolved upstream in GMime
at https://github.com/jstedfast/gmime/pull/90.
We adapt to this by marking tests of reported User IDs for
S/MIME-signed messages as known-broken if GMime is older than 3.2.7
and has not been patched.
If GMime >= 3.2.7 and certificate validity still doesn't work for
X.509 certs, then there has likely been a regression in GMime and we
should fail early, during ./configure.
To break out these specific User ID checks from other checks, i had to
split some tests into two parts, and reuse $output across the two
subtests.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Several functions in test/test-lib.sh used variable names that are
also used outside of those functions (e.g. $output and $expected are
used in many of the test scripts), but they are not expected to
communicate via those variables.
We mark those variables "local" within test-lib.sh so that they do not
get clobbered when used outside test-lib.
We also move the local variable declarations to beginning of each
function, to avoid weird gotchas with local variable declarations as
described in https://tldp.org/LDP/abs/html/localvar.html.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
id:CA+Tk8fzRiqxWpd=r8=DRvEewNZXUZgD7MKyRLB1A=R-LxxGEZw@mail.gmail.com
started a thread of discussion that showed that the cli's current
idiosyncrasies around dealing with boolean options were not
understandable.
This attempts to improve the documentation at least (actual changes to
the API might be better, but have not reached consensus).
Note that no one in the discussion thread identified any other
(non-boolean) command-line options that cannot use space as a
separator. If such an option is identified (or introduced in the
future), it should be added explicitly to this part of the manual.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
strncmp looks for a prefix that matches, which is very much not what
we want here. This fixes the bug reported by Franz Fellner in
id:1588595993-ner-8.651@TPL520
|
|
In id:1588595993-ner-8.651@TPL520 Franz Fellner reported that tags
starting with 'attachment' are removed by 'notmuch reindex'. This is
probably related to the use of STRNCMP_LITERAL in
_notmuch_message_remove_indexed_terms.
|
|
GPGME has a strange failure mode when it is in offline mode, and/or
when certificates don't have any CRLs: in particular, it refuses to
accept the validity of any certificate other than a "root" cert.
This can be worked around by setting the `disable-crl-checks`
configuration variable for gpgsm.
I've reported this to the GPGME upstream at
https://dev.gnupg.org/T4883, but I have no idea how it will be
resolved. In the meantime, we'll just work around it.
Note that this fixes the test for verification of
id:smime-multipart-signed@protected-headers.example, because
multipart/signed messages are already handled correctly (one-part
PKCS#7 messages will get fixed later).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Recognize the protected subject for S/MIME example protected header
messages.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Add a simple S/MIME SignedData message, taken from an upcoming draft
of
https://datatracker.ietf.org/doc/draft-autocrypt-lamps-protected-headers/
RFC 8551 describes a SignedData, a one-part clearsigned object that is
more resistant to common patterns of MTA message munging than
multipart/signed (but has the downside that it is only readable by
clients that implement S/MIME).
To make sure sure notmuch can handle this kind of object, we want to
know a few things:
Already working:
- Is the content of the SignedData object indexed? It actually is
right now because of dumb luck -- i think we're indexing the raw
CMS object and it happens to contain the cleartext of the message
in a way that we can consume it before passing it on to Xapian.
- Are we accidentally indexing the embedded PKCS#7 certificates? We
don't want to, and for some reason I don't understand, our indexing
is actually skipping the embedded certificates already. That's
good!
Still need fixing:
- do we know the MIME type of the embedded part?
- do we know that the message is signed?
- can notmuch-show read its content?
- can notmuch-show indicate the signature validity?
- can notmuch-reply properly quote and attribute content?
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
This test does exactly what it says on the tin. It expects JSON data
to be parseable by Python, at least.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
These tests describe some simple behavior we would expect to work if
we were to correctly index the cleartext of encrypted S/MIME messages
(PKCS#7 envelopedData).
Of course, they don't currently pass, so we mark them known-broken.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
When consuming a signed+encrypted S/MIME message generated by emacs,
we expect to see the same cryptographic properties for the message as
a whole. This is not done correctly yet, so the test is marked as
known broken.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
These sample messages are taken directly from the Protected Headers
draft:
https://www.ietf.org/id/draft-autocrypt-lamps-protected-headers-02.html
Note that this commit doesn't strictly pass the common git pre-commit
hook due to introducing some trailing whitespace. That's just the
nature of the corpus, though. We should have that trailing
whitespace, so I've made this commit with --no-verify.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
This is taken from the same Internet Draft that test/smime/ca.crt
comes from. See that draft for more details.
https://www.ietf.org/id/draft-dkg-lamps-samples-02.html#name-pkcs12-object-for-bob
We don't use it yet, but it will be used to decrypt other messages in
the test suite.
Note that we include it here with an empty passphrase, rather than
with the passphrase "bob" that it is supplied with in the I-D. The
underlying cryptographic material is the same, but this way we can
import cleanly into gpgsm without having a passphrase set on it (gpgsm
converts an empty-string passphrase into no passphrase at all on
import).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Without this fix, we couldn't run both add_gnupg_home and
add_gpgsm_home in the same test script.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
No functional change.
We no longer need to identify the key and cert to mml-mode when
sending an S/MIME message, so making a copy of key+cert.pem to
test_suite.pem is superfluous. Get rid of the extra file.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
The documentation for message mode clearly states that EasyPG (which
uses GnuPG) is the default and recommended way to use S/MIME with
mml-secure:
[0] https://www.gnu.org/software/emacs/manual/html_node/message/Using-S_002fMIME.html
To ensure that this mode works, we just need to import the secret key
in question into gpgsm in addition to the public key. gpgsm should be
able pick the right keys+certificates to use based on To/From headers,
so we don't have to specify anything manually in the #secure mml tag.
The import process from the OpenSSL-preferred form (cert+secretkey) is
rather ugly, because gpgsm wants to see a PKCS#12 object when
importing secret keys.
Note that EasyPG generates the more modern Content-Type:
application/pkcs7-signature instead of application/x-pkcs7-signature
for the detached signature.
We are also obliged to manually set gpgsm's include-certs setting to 1
because gpgsm defaults to send "everything but the root cert". In our
weird test case, the certificate we're using is self-signed, so it
*is* the root cert, which means that gpgsm doesn't include it by
default. Setting it to 1 forces inclusion of the signer's cert, which
satisfies openssl's smime subcommand. See https://dev.gnupg.org/T4878
for more details.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
This CA is useful for test suites and the like, but is not an
actually-secure CA, because its secret key material is also published.
I plan to use it for its intended purpose in the notmuch test suite.
It was copied from this Internet Draft:
https://tools.ietf.org/id/draft-dkg-lamps-samples-01.html#name-certificate-authority-certi
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
GnuPG's gpgsm, like gpg, should always be used with --batch when it is
invoked in a non-interactive environment.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
This allows us to test S/MIME messages in other tests.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
|
|
It turns out that putting inline functions in C header files is not a
good idea, and can cause linking problems if the compiler decides not
to inline them. In principle this is solvable by using a "static
inline" declaration, but this potentially makes a copy in every
compilation unit. Since we don't actually care about the performance
of this function, just use a non-inline function.
|
|
Starting with Emacs 27 the old `cl' implementation is finally
considered obsolete. Previously its use was strongly discouraged
at run-time but one was still allowed to use it at compile-time.
For the most part the transition is very simple and boils down to
adding the "cl-" prefix to some symbols. A few replacements do not
follow that simple pattern; e.g. `first' is replaced with `car',
even though the alias `cl-first' exists, because the latter is not
idiomatic emacs-lisp.
In a few cases we start using `pcase-let' or `pcase-lambda' instead
of renaming e.g. `first' to `car'. That way we can remind the reader
of the meaning of the various parts of the data that is being
deconstructed.
An obsolete `lexical-let' and a `lexical-let*' are replaced with their
regular variants `let' and `let*' even though we do not at the same
time enable `lexical-binding' for that file. That is the right thing
to do because it does not actually make a difference in those cases
whether lexical bindings are used or not, and because this should be
enabled in a separate commit.
We need to explicitly depend on the `cl-lib' package because Emacs
24.1 and 24.2 lack that library. When using these releases we end
up using the backport from GNU Elpa.
We need to explicitly require the `pcase' library because
`pcase-dolist' was not autoloaded until Emacs 25.1.
|
|
This test extracts values from a (key,value) map where multiple entries
can have the same key, and the entries are sorted by key, but not by
value. The test incorrectly assumes that the values will be sorted as
well, so sort the output.
|
|
Xapian 1.4 is over 3 years old now (1.4.0 released 2016-06-24),
and 1.2 has been deprecated in Notmuch version 0.27 (2018-06-13).
Xapian 1.4 supports compaction, field processors and retry locking;
conditionals checking compaction and field processors were removed
but user may want to disable retry locking at configure time so it
is kept.
|
|
We use various things that were not available in earlier versions.
|
|
|
|
|
