| Age | Commit message (Collapse) | Author |
|---|
|
I can't see any benefit to the funcall, and it looks like the result
of cut-and-paste from some code that actually used a variable for the
function to call.
|
|
This just converts notmuch-pick to use the sexp parser.
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
From Fedora.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Like in Fedora.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Also to sync with Fedora.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Mostly to sync with Fedora's spec.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
So at least it builds.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
|
|
In addition to being the Right Thing to do, this noticeably improves
the time taken to display the first page of search results, since it's
roughly an order of magnitude faster than the JSON parser.
Interestingly, it does *not* significantly improve the time to
completely fill a large search buffer because for large search
buffers, the cost of creating author invisibility overlays and
inserting text (which slows down with more overlays) dominates.
However, the time required to display the first page of results is
generally more important to the user experience.
|
|
This provides the same interface as the streaming JSON parser, but
reads S-expressions incrementally. The only difference is that the
`notmuch-sexp-parse-partial-list' helper does not handle interleaved
error messages (since we now have the ability to separate these out at
the invocation level), so it no longer takes an error function and
does not need to do the horrible resynchronization that the JSON
parser had to.
Some implementation improvements have been made over the JSON parser.
This uses a vector instead of a list for the parser data structure,
since this allows faster access to elements (and modern versions of
Emacs handle storage of small vectors efficiently). Private functions
follow the "prefix--name" convention. And the implementation is much
simpler overall because S-expressions are much easier to parse.
|
|
Previously, search started the async notmuch process directly. Now,
it uses `notmuch-start-notmuch'. This simplifies the process sentinel
a bit and means that we no longer have to worry about errors
interleaved with the JSON output.
We also update the tests of Emacs error handling, since the error
output is now separated from the search results buffer.
|
|
This provides a new notmuch-lib utility to start an asynchronous
notmuch process that handles redirecting of stderr and checking of the
exit status. This is similar to `notmuch-call-notmuch-json', but for
asynchronous processes (and it leaves output processing to the
caller).
|
|
We now check error handling more carefully in the last test in
test/emacs and we're about to add more error handling tests. (This
was also a strange place for this test, since it had nothing to do
with large search buffers.)
|
|
|
|
Since the part commands are no longer tied to a button, but can be
applied with point anywhere within a part, bind the part commands
keymap to "." everywhere in the show buffer. This lets you save or
view parts without having to navigate to the part button, and is
particularly useful for parts that have no button.
This removes the un-prefixed MIME part commands from the part button
keymap, but that's okay because those clashed in annoying ways with
show buffer bindings like "s" for search. RET on part buttons is
unaffected, which is the most important part button binding.
|
|
This unifies the part button actions and the underlying part action
functions into single interactive command that simply applies to the
part containing point using the just-added part p-list text property
instead of button properties. Since all part actions can be performed
by applying the appropriate mm function to an mm-handle, this patch
abstracts out the creation of mm handles, making the implementations
of the part commands trivial. This also eliminates our special
handling for part save in favor of using the appropriate mm function.
This necessarily modifies the way we handle the default part button
action, but in a way that does not change the meaning of the
notmuch-show-part-button-default-action defcustom.
Since these commands are no longer specific to buttons, this patch
eliminates the extra metadata stored with each button. This also
eliminates one rather special-purpose macro for a collection of
general purpose part handling utilities.
|
|
This is similar to what we already do with the message p-list, though
we apply the part's text property to the whole part's text, in
contrast with the message p-list, which is (rather obscurely) only
applied to the first character.
|
|
Previously, we lost any text properties applied to part buttons or
wash buttons when they were toggled because `insert' directly copies
the text properties of the string being inserted. Fix this by
capturing the properties applied to the button beforehand and
re-applying them after inserting the new text.
|
|
|
|
Clean up leftovers from help system rework. These are no longer
needed. They are easy to resurrect and update if a need later arises.
|
|
|
|
|
|
--stderr=FILE tests were added to test/help-test as it is the one
doing most global option testing. Also, it was simplest to test
this new option using `notmuch help` command.
|
|
With this option all writes to stderr are redirected to the specified
FILE (or to stdout on case FILE is '-'). This is immediately useful
in emacs interface as some of its exec intefaces do not provide
separation of stdout and stderr.
|
|
For such a simple regexp, this was broken in a very complicated way.
The intent was to strip the newline (and potentially other whitespace)
off the end of the error string so there wasn't an extra newline in
the error signal. However, the regexp was deeply dependent on the
active syntax table and the subtleties of $. We didn't notice this
because all notmuch major modes put ?\n in the whitespace class, which
makes this behaved as intended: the "\\s " matches all newlines, but
by matching the newline character, causes the $ *not* to match
*except* where it matched the empty string at the very end of the
string, which was not followed by a newline.
However, if the syntax table declares ?\n to be non-whitespace
(lisp-mode declares it as endcomment, and is likely to be the mode
you're in when testing functions), then this regexp behaves completely
differently, matching trailing spaces at the end of every line within
the string.
The solution is to say what we mean for whitespace *and* to switch
from $ to \', which matches only the end of the string, rather than
the end of each line. Both are necessary or this will strip away
interior newlines, which is not what we want.
|
|
Support for out-of-tree builds was added in
commit 3e4a9d60a9419621b08c647a306843d76c47c2cb
Author: Carl Worth <cworth@cworth.org>
Date: Wed Mar 9 15:02:42 2011 -0800
build: Add support for non-source-directory builds.
and broken in
commit 7beeb8c88a014ecbc53d8241f10683b3c4c16228
Author: David Bremner <bremner@debian.org>
Date: Sat Nov 17 12:28:15 2012 -0400
test: initial performance testing infrastructure
Fix the build breakage.
Out-of-tree 'make test' has been broken since earlier than the above,
and remains broken, as does out-of-tree perf test, but at least the
build now works.
|
|
We have most of the plumbing in place, add the bindings M-n and M-p.
|
|
Previously, notmuch-show-view-part overrode the function binding of
mm-show-part to redirect it to notmuch-show-save-part to get notmuch's
default file name handling in case mm-display-part decided to fall
back to saving the part. In addition to being messy, this depended on
the now-deprecated dynamic binding behavior of flet.
This patch removes the mm-show-part override in favor of passing the
file name in to mm-show-part the way it expects, so we get its default
file name handling. It's not clear why we didn't do this before;
mm-show-part has supported default file names since at least Emacs
23.1.
|
|
|
|
merge back debian-only release into master
|
|
|
|
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Currently it simply finds any library available, and if notmuch is
installed in the system, it would give priority to that library.
Let's implement our own helper functions to link directly to the local
library, and give priority to the local header file.
Also, add an option to properly check if there are missing symbols.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
Previously, we simply byte compiled each Elisp source file
independently. This is actually the wrong thing to do and can lead to
issues with macros and performance issues with substitutions because
1) when the byte compiler encounters a (require 'x) form, it will load
x.elc in preference to x.el, even if x.el is newer, and as a result
may load old macro and substitution definitions and 2) if we update a
macro or substitution definition in one file, we currently won't
re-compile other files that depend on the file containing the
definition.
This patch addresses these problems by computing make dependency rules
from the (require 'x) forms in the Elisp source files, which we inject
into make's dependency database.
|
|
It has never existed in Ruby (maybe JRuby). Fortunately the symbols are
loaded lazily, so nobody would notice unless they try
'query::count_messages'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
|
|
I find this script pretty useful when figuring out who to blame for
MIME rendering problems.
The notmuch repo will be the new primary home for this script, unless
and until a better home turns up.
|
|
This adds a target message for pick which it will jump to when (if) it
appears. It adds the target to notmuch-pick-from-show-current-query so
that pick goes straight to the message that was current in the show
view and it adds target to notmuch-pick-refresh-view so that the
current message is preserved.
|
|
Pick keeps point roughly at the top of the buffer while inserting
messages at the end as they come in (from the async
parser). Previously the save-excursion to do this was done once for
each thread inserted: now it is done for each individual message.
The advantage is that the message insertion code can decide where to
leave point. In the next patch point will be left on the target message.
Note notmuch-pick-insert-msg is unchanged as that is used by the tag
display update code.
|
|
The inline patch fake part handler also modifies the content-type so
handle this in notmuch-show-insert-bodypart too.
|
|
Currently mime parts are basically handled based on their mime-type
with the exception of application/octet-stream parts. Deal with these
parts at the top level (notmuch-show-insert-bodypart).
This is needed later in the series as we need to put in a part button
for each part (which means knowing its mime type) while deferring the
actual insertion of the part.
|
|
Apparently Emacs provides a function to stringify errors properly.
Use this in the search sentinel where we have to do our own error
messaging, rather than assuming the first error argument will be the
descriptive string.
|
|
When compiling notmuch-tag.el there is a compile warning:
notmuch-tag.el:27:1:Warning: cl package required at runtime
Since we have decided to allow runtime use of cl we suppress this
warning by adding a tail comment to the file.
|
|
Somehow this file was not added to the patch set which split the tests
into time and memory tests. Take advantage of the the "new" way of
running tests to avoid listing the explicitly.
|
|
This avoids hassle with manually adding every test to the master list.
|
|
This will simplify notmuch time tests
|
|
The common suffix will help running them all automatically.
|
