3 # Copyright (c) 2005 Junio C Hamano
5 # This program is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see http://www.gnu.org/licenses/ .
18 if [ ${BASH_VERSINFO[0]} -lt 4 ]; then
19 echo "Error: The notmuch test suite requires a bash version >= 4.0"
20 echo "due to use of associative arrays within the test suite."
21 echo "Please try again with a newer bash (or help us fix the"
22 echo "test suite to be more portable). Thanks."
26 # if --tee was passed, write the output not only to the terminal, but
27 # additionally to the file test-results/$BASENAME.out, too.
28 case "$GIT_TEST_TEE_STARTED, $* " in
30 # do not redirect again
32 *' --tee '*|*' --va'*)
34 BASE=test-results/$(basename "$0" .sh)
35 (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
36 echo $? > $BASE.exit) | tee $BASE.out
37 test "$(cat $BASE.exit)" = 0
42 # Keep the original TERM for say_color
45 # For repeatability, reset the environment to known value.
51 export LANG LC_ALL PAGER TERM TZ
52 GIT_TEST_CMP=${GIT_TEST_CMP:-diff -u}
54 # Protect ourselves from common misconfiguration to export
55 # CDPATH into the environment
62 # A regexp to match 5 and 40 hexdigits
63 _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
64 _x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
66 _x04='[0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
67 _x32="$_x04$_x04$_x04$_x04$_x04$_x04$_x04$_x04"
69 # Each test should start with something like this, after copyright notices:
71 # test_description='Description of this test...
72 # This test checks if command xyzzy does the right thing...
75 [ "x$ORIGINAL_TERM" != "xdumb" ] && (
76 TERM=$ORIGINAL_TERM &&
79 tput bold >/dev/null 2>&1 &&
80 tput setaf 1 >/dev/null 2>&1 &&
81 tput sgr0 >/dev/null 2>&1
88 -d|--d|--de|--deb|--debu|--debug)
90 -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
92 -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
93 GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
94 -h|--h|--he|--hel|--help)
96 -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
98 -q|--q|--qu|--qui|--quie|--quiet)
101 with_dashes=t; shift ;;
107 --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
108 valgrind=t; verbose=t; shift ;;
110 shift ;; # was handled already
112 root=$(expr "z$1" : 'z[^=]*=\(.*\)')
115 echo "error: unknown test option '$1'" >&2; exit 1 ;;
119 if test -n "$color"; then
125 error) tput bold; tput setaf 1;; # bold red
126 skip) tput bold; tput setaf 2;; # bold green
127 pass) tput setaf 2;; # green
128 info) tput setaf 3;; # brown
129 *) test -n "$quiet" && return;;
139 test -z "$1" && test -n "$quiet" && return
147 say_color error "error: $*"
156 test "${test_description}" != "" ||
157 error "Test script did not set test_description."
159 if test "$help" = "t"
161 echo "Tests ${test_description}"
165 echo $(basename "$0"): "Testing ${test_description}"
168 if test "$verbose" = "t"
172 exec 4>/dev/null 3>/dev/null
183 if test -n "$GIT_EXIT_OK"
187 echo >&5 "FATAL: Unexpected exit with code $code"
195 test_decode_color () {
196 sed -e 's/.\[1m/<WHITE>/g' \
197 -e 's/.\[31m/<RED>/g' \
198 -e 's/.\[32m/<GREEN>/g' \
199 -e 's/.\[33m/<YELLOW>/g' \
200 -e 's/.\[34m/<BLUE>/g' \
201 -e 's/.\[35m/<MAGENTA>/g' \
202 -e 's/.\[36m/<CYAN>/g' \
203 -e 's/.\[m/<RESET>/g'
215 sed -e 's/$/Q/' | tr Q '\015'
219 tr '\015' Q | sed -e 's/Q$//'
222 # Notmuch helper functions
223 increment_mtime_amount=0
228 increment_mtime_amount=$((increment_mtime_amount + 1))
229 touch -d "+${increment_mtime_amount} seconds" "$dir"
232 # Generate a new message in the mail directory, with a unique message
233 # ID and subject. The message is not added to the index.
235 # After this function returns, the filename of the generated message
236 # is available as $gen_msg_filename and the message ID is available as
239 # This function supports named parameters with the bash syntax for
240 # assigning a value to an associative array ([name]=value). The
241 # supported parameters are:
243 # [dir]=directory/of/choice
245 # Generate the message in directory 'directory/of/choice' within
246 # the mail store. The directory will be created if necessary.
250 # Store the message in file 'name'. The default is to store it
251 # in 'msg-<count>', where <count> is three-digit number of the
256 # Text to use as the body of the email message
258 # '[from]="Some User <user@example.com>"'
259 # '[to]="Some User <user@example.com>"'
260 # '[subject]="Subject of email message"'
261 # '[date]="RFC 822 Date"'
263 # Values for email headers. If not provided, default values will
264 # be generated instead.
266 # '[cc]="Some User <user@example.com>"'
267 # [reply-to]=some-address
268 # [in-reply-to]=<message-id>
269 # [references]=<message-id>
270 # [content-type]=content-type-specification
271 # '[header]=full header line, including keyword'
273 # Additional values for email headers. If these are not provided
274 # then the relevant headers will simply not appear in the
279 # Controls the message-id of the created message.
285 # This is our (bash-specific) magic for doing named parameters
286 local -A template="($@)"
287 local additional_headers
289 gen_msg_cnt=$((gen_msg_cnt + 1))
290 if [ -z "${template[filename]}" ]; then
291 gen_msg_name="msg-$(printf "%03d" $gen_msg_cnt)"
293 gen_msg_name=${template[filename]}
296 if [ -z "${template[id]}" ]; then
297 gen_msg_id="${gen_msg_name%:2,*}@notmuch-test-suite"
299 gen_msg_id="${template[id]}"
302 if [ -z "${template[dir]}" ]; then
303 gen_msg_filename="${MAIL_DIR}/$gen_msg_name"
305 gen_msg_filename="${MAIL_DIR}/${template[dir]}/$gen_msg_name"
306 mkdir -p "$(dirname "$gen_msg_filename")"
309 if [ -z "${template[body]}" ]; then
310 template[body]="This is just a test message (#${gen_msg_cnt})"
313 if [ -z "${template[from]}" ]; then
314 template[from]="Notmuch Test Suite <test_suite@notmuchmail.org>"
317 if [ -z "${template[to]}" ]; then
318 template[to]="Notmuch Test Suite <test_suite@notmuchmail.org>"
321 if [ -z "${template[subject]}" ]; then
322 template[subject]="Test message #${gen_msg_cnt}"
325 if [ -z "${template[date]}" ]; then
326 template[date]="Tue, 05 Jan 2001 15:43:57 -0000"
329 additional_headers=""
330 if [ ! -z "${template[header]}" ]; then
331 additional_headers="${template[header]}
332 ${additional_headers}"
335 if [ ! -z "${template[reply-to]}" ]; then
336 additional_headers="Reply-To: ${template[reply-to]}
337 ${additional_headers}"
340 if [ ! -z "${template[in-reply-to]}" ]; then
341 additional_headers="In-Reply-To: ${template[in-reply-to]}
342 ${additional_headers}"
345 if [ ! -z "${template[cc]}" ]; then
346 additional_headers="Cc: ${template[cc]}
347 ${additional_headers}"
350 if [ ! -z "${template[references]}" ]; then
351 additional_headers="References: ${template[references]}
352 ${additional_headers}"
355 if [ ! -z "${template[content-type]}" ]; then
356 additional_headers="Content-Type: ${template[content-type]}
357 ${additional_headers}"
361 cat <<EOF >"$gen_msg_filename"
362 From: ${template[from]}
364 Message-Id: <${gen_msg_id}>
365 Subject: ${template[subject]}
366 Date: ${template[date]}
367 ${additional_headers}
371 # Ensure that the mtime of the containing directory is updated
372 increment_mtime "$(dirname "${gen_msg_filename}")"
375 # Generate a new message and add it to the database.
377 # All of the arguments and return values supported by generate_message
378 # are also supported here, so see that function for details.
381 generate_message "$@" &&
382 notmuch new > /dev/null
385 # Generate a corpus of email and add it to the database.
387 # This corpus is fixed, (it happens to be 50 messages from early in
388 # the history of the notmuch mailing list), which allows for reliably
389 # testing commands that need to operate on a not-totally-trivial
390 # number of messages.
394 if [ -d ../corpus.mail ]; then
395 cp -a ../corpus.mail ${MAIL_DIR}
397 cp -a ../corpus ${MAIL_DIR}
398 notmuch new >/dev/null
399 cp -a ${MAIL_DIR} ../corpus.mail
403 test_begin_subtest ()
405 test_subtest_name="$1"
408 # Pass test if two arguments match
410 # Note: Unlike all other test_expect_* functions, this function does
411 # not accept a test name. Instead, the caller should call
412 # test_begin_subtest before calling this function in order to set the
416 test "$#" = 3 && { prereq=$1; shift; } || prereq=
418 error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
424 if [ "$output" = "$expected" ]; then
425 test_ok_ "$test_subtest_name"
427 testname=$this_test.$test_count
428 echo "$expected" > $testname.expected
429 echo "$output" > $testname.output
430 test_failure_ "$test_subtest_name" "$(diff -u $testname.expected $testname.output)"
435 test_expect_equal_failure ()
437 test "$#" = 3 && { prereq=$1; shift; } || prereq=
439 error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
445 if [ "$output" = "$expected" ]; then
446 test_known_broken_ok_ "$test_subtest_name"
448 test_known_broken_failure_ "$test_subtest_name"
455 notmuch new | grep -v -E -e '^Processed [0-9]*( total)? file|Found [0-9]* total file'
458 notmuch_search_sanitize ()
460 sed -r -e 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/'
463 NOTMUCH_SHOW_FILENAME_SQUELCH='s,filename:.*/mail,filename:/XXX/mail,'
464 notmuch_show_sanitize ()
466 sed -e "$NOTMUCH_SHOW_FILENAME_SQUELCH"
469 # End of notmuch helper functions
471 # Use test_set_prereq to tell that a particular prerequisite is available.
472 # The prerequisite can later be checked for in two ways:
474 # - Explicitly using test_have_prereq.
476 # - Implicitly by specifying the prerequisite tag in the calls to
477 # test_expect_{success,failure,code}.
479 # The single parameter is the prerequisite tag (a simple word, in all
480 # capital letters by convention).
483 satisfied="$satisfied$1 "
487 test_have_prereq () {
496 # You are not expected to call test_ok_ and test_failure_ directly, use
497 # the text_expect_* functions instead.
500 test_success=$(($test_success + 1))
501 say_color pass "%-6s" "PASS"
506 test_failure=$(($test_failure + 1))
507 say_color error "%-6s" "FAIL"
510 echo "$@" | sed -e 's/^/ /'
511 test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
514 test_known_broken_ok_ () {
515 test_fixed=$(($test_fixed+1))
516 say_color pass "%-6s" "FIXED"
520 test_known_broken_failure_ () {
521 test_broken=$(($test_broken+1))
522 say_color pass "%-6s" "BROKEN"
527 test "$debug" = "" || eval "$1"
534 eval >&3 2>&4 "$test_cleanup"
539 test_count=$(($test_count+1))
541 for skp in $NOTMUCH_SKIP_TESTS
543 case $this_test.$test_count in
548 if test -z "$to_skip" && test -n "$prereq" &&
549 ! test_have_prereq "$prereq"
555 say_color skip >&3 "skipping test: $@"
556 say_color skip "%-6s" "SKIP"
566 test_expect_failure () {
567 test "$#" = 3 && { prereq=$1; shift; } || prereq=
569 error "bug in the test script: not 2 or 3 parameters to test-expect-failure"
573 if [ "$?" = 0 -a "$eval_ret" = 0 ]
575 test_known_broken_ok_ "$1"
577 test_known_broken_failure_ "$1"
582 test_expect_success () {
583 test "$#" = 3 && { prereq=$1; shift; } || prereq=
585 error "bug in the test script: not 2 or 3 parameters to test-expect-success"
589 if [ "$?" = 0 -a "$eval_ret" = 0 ]
598 test_expect_code () {
599 test "$#" = 4 && { prereq=$1; shift; } || prereq=
601 error "bug in the test script: not 3 or 4 parameters to test-expect-code"
605 if [ "$?" = 0 -a "$eval_ret" = "$1" ]
614 # test_external runs external test scripts that provide continuous
615 # test output about their progress, and succeeds/fails on
616 # zero/non-zero exit code. It outputs the test output on stdout even
617 # in non-verbose mode, and announces the external script with "* run
618 # <n>: ..." before running it. When providing relative paths, keep in
619 # mind that all scripts run in "trash directory".
620 # Usage: test_external description command arguments...
621 # Example: test_external 'Perl API' perl ../path/to/test.pl
623 test "$#" = 4 && { prereq=$1; shift; } || prereq=
625 error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
628 if ! test_skip "$descr" "$@"
630 # Announce the script to reduce confusion about the
631 # test output that follows.
632 say_color "" " run $test_count: $descr ($*)"
633 # Run command; redirect its stderr to &4 as in
634 # test_run_, but keep its stdout on our stdout even in
641 test_failure_ "$descr" "$@"
646 # Like test_external, but in addition tests that the command generated
647 # no output on stderr.
648 test_external_without_stderr () {
649 # The temporary file has no (and must have no) security
651 tmp="$TMPDIR"; if [ -z "$tmp" ]; then tmp=/tmp; fi
652 stderr="$tmp/git-external-stderr.$$.tmp"
653 test_external "$@" 4> "$stderr"
654 [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
655 descr="no stderr: $1"
657 if [ ! -s "$stderr" ]; then
661 if [ "$verbose" = t ]; then
662 output=`echo; echo Stderr is:; cat "$stderr"`
666 # rm first in case test_failure exits.
668 test_failure_ "$descr" "$@" "$output"
672 # This is not among top-level (test_expect_success | test_expect_failure)
673 # but is a prefix that can be used in the test script, like:
675 # test_expect_success 'complain and die' '
677 # do something else &&
678 # test_must_fail git checkout ../outerspace
681 # Writing this as "! git checkout ../outerspace" is wrong, because
682 # the failure could be due to a segv. We want a controlled failure.
686 test $? -gt 0 -a $? -le 129 -o $? -gt 192
689 # test_cmp is a helper function to compare actual and expected output.
690 # You can use it like:
692 # test_expect_success 'foo works' '
693 # echo expected >expected &&
695 # test_cmp expected actual
698 # This could be written as either "cmp" or "diff -u", but:
699 # - cmp's output is not nearly as easy to read as diff -u
700 # - not all diff versions understand "-u"
706 # This function can be used to schedule some commands to be run
707 # unconditionally at the end of the test to restore sanity:
709 # test_expect_success 'test core.capslock' '
710 # git config core.capslock true &&
711 # test_when_finished "git config --unset core.capslock" &&
715 # That would be roughly equivalent to
717 # test_expect_success 'test core.capslock' '
718 # git config core.capslock true &&
720 # git config --unset core.capslock
723 # except that the greeting and config --unset must both succeed for
726 test_when_finished () {
728 } && (exit \"\$eval_ret\"); eval_ret=\$?; $test_cleanup"
733 test_results_dir="$TEST_DIRECTORY/test-results"
734 mkdir -p "$test_results_dir"
735 test_results_path="$test_results_dir/${0%.sh}-$$"
737 echo "total $test_count" >> $test_results_path
738 echo "success $test_success" >> $test_results_path
739 echo "fixed $test_fixed" >> $test_results_path
740 echo "broken $test_broken" >> $test_results_path
741 echo "failed $test_failure" >> $test_results_path
742 echo "" >> $test_results_path
746 if [ "$test_failure" = "0" ]; then
755 # Construct a little test script here for the benefit of the user,
756 # (who can easily run "run_emacs" to get the same emacs environment
757 # for investigating any failures).
758 cat <<EOF > run_emacs
761 export NOTMUCH_CONFIG=$NOTMUCH_CONFIG
763 # We assume that the user will give a command-line argument only if
764 # wanting to run in batch mode.
765 if [ \$# -gt 0 ]; then
769 # Here's what we are using here:
771 # --batch: Quit after given commands and print all (messages)
773 # --no-init-file Don't load users ~/.emacs
775 # --no-site-file Don't load the site-wide startup stuff
777 # --directory Ensure that the local notmuch.el source is found
779 # --load Force loading of notmuch.el
781 # notmuch-test-wait Function for tests to use to wait for process completion
783 # message-signature Avoiding appending user's signature on messages
785 # set-frame-width 80 columns (avoids crazy 10-column default of --batch)
787 emacs \$BATCH --no-init-file --no-site-file \
788 --directory ../../emacs --load notmuch.el \
789 --eval "(defun notmuch-test-wait ()
790 (while (get-buffer-process (current-buffer))
792 --eval "(setq message-signature nil)" \
793 --eval "(progn (set-frame-width (window-frame (get-buffer-window)) 80) \$@)"
795 chmod a+x ./run_emacs
804 while [ -n "$dir" ]; do
806 if [ -x "$bin" ]; then
810 dir="$(dirname "$dir")"
811 if [ "$dir" = "/" ]; then
817 # Test the binaries we have just built. The tests are kept in
818 # test/ subdirectory and are run in 'trash directory' subdirectory.
819 TEST_DIRECTORY=$(pwd)
820 if test -n "$valgrind"
824 test "$1" = "$(readlink "$2")" || {
832 while test -d "$2".lock
834 say "Waiting for lock on $2."
841 make_valgrind_symlink () {
842 # handle only executables
843 test -x "$1" || return
845 base=$(basename "$1")
846 symlink_target=$TEST_DIRECTORY/../$base
847 # do not override scripts
848 if test -x "$symlink_target" &&
849 test ! -d "$symlink_target" &&
850 test "#!" != "$(head -c 2 < "$symlink_target")"
852 symlink_target=../valgrind.sh
856 symlink_target=../unprocessed-script
858 # create the link, or replace it if it is out of date
859 make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit
862 # override notmuch executable in TEST_DIRECTORY/..
863 GIT_VALGRIND=$TEST_DIRECTORY/valgrind
864 mkdir -p "$GIT_VALGRIND"/bin
865 make_valgrind_symlink $TEST_DIRECTORY/../notmuch
870 ls "$path"/notmuch 2> /dev/null |
873 make_valgrind_symlink "$file"
877 PATH=$GIT_VALGRIND/bin:$PATH
878 GIT_EXEC_PATH=$GIT_VALGRIND/bin
881 notmuch_path=`find_notmuch_path "$TEST_DIRECTORY"`
882 test -n "$notmuch_path" && PATH="$notmuch_path:$PATH"
887 test="tmp.$(basename "$0" .sh)"
888 test -n "$root" && test="$root/$test"
890 /*) TMP_DIRECTORY="$test" ;;
891 *) TMP_DIRECTORY="$TEST_DIRECTORY/$test" ;;
893 test ! -z "$debug" || remove_tmp=$TMP_DIRECTORY
896 echo >&5 "FATAL: Cannot prepare test area"
900 MAIL_DIR="${TMP_DIRECTORY}/mail"
901 export NOTMUCH_CONFIG="${TMP_DIRECTORY}/notmuch-config"
904 mkdir -p "${MAIL_DIR}"
906 cat <<EOF >"${NOTMUCH_CONFIG}"
911 name=Notmuch Test Suite
912 primary_email=test_suite@notmuchmail.org
913 other_email=test_suite_other@notmuchmail.org;test_suite@otherdomain.org
917 # Use -P to resolve symlinks in our working directory so that the cwd
918 # in subprocesses like git equals our $PWD (for pathname comparisons).
919 cd -P "$test" || error "Cannot setup test environment"
922 for skp in $NOTMUCH_SKIP_TESTS
925 for skp in $NOTMUCH_SKIP_TESTS
934 say_color skip >&3 "skipping test $this_test altogether"
935 say_color skip "skip all tests in $this_test"
940 # Provide an implementation of the 'yes' utility
955 # Fix some commands on Windows
958 # Windows has its own (incompatible) sort and find
968 # git sees Windows-style pwd
972 # no POSIX permissions
973 # backslashes in pathspec are converted to '/'
974 # exec does not inherit the PID
977 test_set_prereq POSIXPERM
978 test_set_prereq BSLASHPSPEC
979 test_set_prereq EXECKEEPSPID
983 test -z "$NO_PERL" && test_set_prereq PERL
984 test -z "$NO_PYTHON" && test_set_prereq PYTHON
986 # test whether the filesystem supports symbolic links
987 ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS