#
# Copyright (c) 2005 Junio C Hamano
+# Copyright (c) 2010 Notmuch Developers
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see http://www.gnu.org/licenses/ .
+# along with this program. If not, see https://www.gnu.org/licenses/ .
if [ ${BASH_VERSINFO[0]} -lt 4 ]; then
echo "Error: The notmuch test suite requires a bash version >= 4.0"
*' --tee '*|*' --va'*)
mkdir -p test-results
BASE=test-results/$this_test
- (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
+ (GIT_TEST_TEE_STARTED=done "$BASH" "$0" "$@" 2>&1;
echo $? > $BASE.exit) | tee $BASE.out
test "$(cat $BASE.exit)" = 0
exit
# Keep the original TERM for say_color and test_emacs
ORIGINAL_TERM=$TERM
-# dtach(1) provides more capable terminal environment to anything
-# that requires more than dumb terminal...
-[ x"${TERM:-dumb}" = xdumb ] && DTACH_TERM=vt100 || DTACH_TERM=$TERM
+# Set SMART_TERM to vt100 for known dumb/unknown terminal.
+# Otherwise use whatever TERM is currently used so that
+# users' actual TERM environments are being used in tests.
+case ${TERM-} in
+ '' | dumb | unknown )
+ SMART_TERM=vt100 ;;
+ *)
+ SMART_TERM=$TERM ;;
+esac
# For repeatability, reset the environment to known value.
LANG=C
fi
TEST_EMACS=${TEST_EMACS:-${EMACS:-emacs}}
TEST_EMACSCLIENT=${TEST_EMACSCLIENT:-emacsclient}
+TEST_GDB=${TEST_GDB:-gdb}
TEST_CC=${TEST_CC:-cc}
TEST_CFLAGS=${TEST_CFLAGS:-"-g -O0"}
unset GREP_OPTIONS
-# Convenience
-#
-# A regexp to match 5 and 40 hexdigits
-_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
-_x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
-
-_x04='[0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
-_x32="$_x04$_x04$_x04$_x04$_x04$_x04$_x04$_x04"
+# For emacsclient
+unset ALTERNATE_EDITOR
# Each test should start with something like this, after copyright notices:
#
# test_description='Description of this test...
# This test checks if command xyzzy does the right thing...
# '
-# . ./test-lib.sh
+# . ./test-lib.sh || exit 1
+
[ "x$ORIGINAL_TERM" != "xdumb" ] && (
TERM=$ORIGINAL_TERM &&
export TERM &&
while test "$#" -ne 0
do
case "$1" in
- -d|--d|--de|--deb|--debu|--debug)
+ -d|--debug)
debug=t; shift ;;
- -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
+ -i|--immediate)
immediate=t; shift ;;
- -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
- GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
- -h|--h|--he|--hel|--help)
+ -h|--help)
help=t; shift ;;
- -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
+ -v|--verbose)
verbose=t; shift ;;
- -q|--q|--qu|--qui|--quie|--quiet)
+ -q|--quiet)
quiet=t; shift ;;
--with-dashes)
with_dashes=t; shift ;;
--no-python)
# noop now...
shift ;;
- --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+ --valgrind)
valgrind=t; verbose=t; shift ;;
--tee)
shift ;; # was handled already
test_broken=0
test_success=0
-_die_common () {
+_exit_common () {
code=$?
trap - EXIT
set +ex
rm -rf "$TEST_TMPDIR"
}
-die () {
- _die_common
+trap_exit () {
+ _exit_common
if test -n "$GIT_EXIT_OK"
then
exit $code
fi
}
-die_signal () {
- _die_common
+trap_signal () {
+ _exit_common
echo >&6 "FATAL: $0: interrupted by signal" $((code - 128))
exit $code
}
+die () {
+ _exit_common
+ exec >&6
+ say_color error '%-6s' FATAL
+ echo " $*"
+ echo
+ echo "Unexpected exit while executing $0."
+ exit 1
+}
+
GIT_EXIT_OK=
# Note: TEST_TMPDIR *NOT* exported!
TEST_TMPDIR=$(mktemp -d "${TMPDIR:-/tmp}/notmuch-test-$$.XXXXXX")
-trap 'die' EXIT
-trap 'die_signal' HUP INT TERM
-
-test_decode_color () {
- sed -e 's/.\[1m/<WHITE>/g' \
- -e 's/.\[31m/<RED>/g' \
- -e 's/.\[32m/<GREEN>/g' \
- -e 's/.\[33m/<YELLOW>/g' \
- -e 's/.\[34m/<BLUE>/g' \
- -e 's/.\[35m/<MAGENTA>/g' \
- -e 's/.\[36m/<CYAN>/g' \
- -e 's/.\[m/<RESET>/g'
-}
-
-q_to_nul () {
- perl -pe 'y/Q/\000/'
-}
-
-q_to_cr () {
- tr Q '\015'
-}
-
-append_cr () {
- sed -e 's/$/Q/' | tr Q '\015'
-}
-
-remove_cr () {
- tr '\015' Q | sed -e 's/Q$//'
-}
+# Put GNUPGHOME in TMPDIR to avoid problems with long paths.
+export GNUPGHOME="${TEST_TMPDIR}/gnupg"
+trap 'trap_exit' EXIT
+trap 'trap_signal' HUP INT TERM
# Generate a new message in the mail directory, with a unique message
# ID and subject. The message is not added to the index.
(message-goto-body)
(insert \"${body}\")
$@
- (message-send-and-exit))"
+ (notmuch-mua-send-and-exit))"
# In case message was sent properly, client waits for confirmation
# before exiting and resuming control here; therefore making sure
(message-goto-body)
(insert \"${body}\")
$@
- (message-send-and-exit))" || return 1
+ (notmuch-mua-send-and-exit))" || return 1
notmuch new >/dev/null
}
-# Generate a corpus of email and add it to the database.
+# Add an existing, fixed corpus of email to the database.
+#
+# $1 is the corpus dir under corpora to add, using "default" if unset.
#
-# This corpus is fixed, (it happens to be 50 messages from early in
-# the history of the notmuch mailing list), which allows for reliably
+# The default corpus is based on about 50 messages from early in the
+# history of the notmuch mailing list, which allows for reliably
# testing commands that need to operate on a not-totally-trivial
# number of messages.
add_email_corpus ()
{
+ corpus=${1:-default}
+
rm -rf ${MAIL_DIR}
- if [ -d $TEST_DIRECTORY/corpus.mail ]; then
- cp -a $TEST_DIRECTORY/corpus.mail ${MAIL_DIR}
+ if [ -d $TEST_DIRECTORY/corpora.mail/$corpus ]; then
+ cp -a $TEST_DIRECTORY/corpora.mail/$corpus ${MAIL_DIR}
else
- cp -a $TEST_DIRECTORY/corpus ${MAIL_DIR}
- notmuch new >/dev/null
- cp -a ${MAIL_DIR} $TEST_DIRECTORY/corpus.mail
+ cp -a $TEST_DIRECTORY/corpora/$corpus ${MAIL_DIR}
+ notmuch new >/dev/null || die "'notmuch new' failed while adding email corpus"
+ mkdir -p $TEST_DIRECTORY/corpora.mail
+ cp -a ${MAIL_DIR} $TEST_DIRECTORY/corpora.mail/$corpus
fi
}
test_expect_equal ()
{
exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_equal without test_begin_subtest"
+ fi
inside_subtest=
- test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
- error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
+ error "bug in the test script: not 2 parameters to test_expect_equal"
output="$1"
expected="$2"
test_expect_equal_file ()
{
exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_equal_file without test_begin_subtest"
+ fi
inside_subtest=
- test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
- error "bug in the test script: not 2 or 3 parameters to test_expect_equal"
+ error "bug in the test script: not 2 parameters to test_expect_equal_file"
file1="$1"
- basename1=`basename "$file1"`
file2="$2"
- basename2=`basename "$file2"`
if ! test_skip "$test_subtest_name"
then
if diff -q "$file1" "$file2" >/dev/null ; then
test_ok_
else
testname=$this_test.$test_count
+ basename1=`basename "$file1"`
+ basename2=`basename "$file2"`
cp "$file1" "$testname.$basename1"
cp "$file2" "$testname.$basename2"
test_failure_ "$(diff -u "$testname.$basename1" "$testname.$basename2")"
# The test suite forces LC_ALL=C, but this causes Python 3 to
# decode stdin as ASCII. We need to read JSON in UTF-8, so
# override Python's stdio encoding defaults.
- output=$(echo "$1" | PYTHONIOENCODING=utf-8 python -mjson.tool \
+ output=$(echo "$1" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
|| echo "$1")
- expected=$(echo "$2" | PYTHONIOENCODING=utf-8 python -mjson.tool \
+ expected=$(echo "$2" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
|| echo "$2")
shift 2
test_expect_equal "$output" "$expected" "$@"
# Sort the top-level list of JSON data from stdin.
test_sort_json () {
- PYTHONIOENCODING=utf-8 python -c \
+ PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -c \
"import sys, json; json.dump(sorted(json.load(sys.stdin)),sys.stdout)"
}
test_emacs_expect_t () {
- test "$#" = 2 && { prereq=$1; shift; } || prereq=
test "$#" = 1 ||
- error "bug in the test script: not 1 or 2 parameters to test_emacs_expect_t"
+ error "bug in the test script: not 1 parameter to test_emacs_expect_t"
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_emacs_expect_t without test_begin_subtest"
+ fi
# Run the test.
if ! test_skip "$test_subtest_name"
notmuch new "${@}" | grep -v -E -e '^Processed [0-9]*( total)? file|Found [0-9]* total file'
}
+NOTMUCH_DUMP_TAGS ()
+{
+ # this relies on the default format being batch-tag, otherwise some tests will break
+ notmuch dump --include=tags "${@}" | sed '/^#/d' | sort
+}
+
notmuch_search_sanitize ()
{
perl -pe 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/'
}
-notmuch_search_files_sanitize()
+notmuch_search_files_sanitize ()
{
- sed -e "s,$MAIL_DIR,MAIL_DIR,"
+ notmuch_dir_sanitize
+}
+
+notmuch_dir_sanitize ()
+{
+ sed -e "s,$MAIL_DIR,MAIL_DIR," -e "s,${PWD},CWD,g" "$@"
}
NOTMUCH_SHOW_FILENAME_SQUELCH='s,filename:.*/mail,filename:/XXX/mail,'
-e 's|"id": "[^"]*",|"id": "XXXXX",|g' \
-e 's|"Date": "Fri, 05 Jan 2001 [^"]*0000"|"Date": "GENERATED_DATE"|g' \
-e 's|"filename": "signature.asc",||g' \
- -e 's|"filename": "/[^"]*",|"filename": "YYYYY",|g' \
- -e 's|"timestamp": 97.......|"timestamp": 42|g'
+ -e 's|"filename": \["/[^"]*"\],|"filename": \["YYYYY"\],|g' \
+ -e 's|"timestamp": 97.......|"timestamp": 42|g' \
+ -e 's|"content-length": [1-9][0-9]*|"content-length": "NONZERO"|g'
}
notmuch_emacs_error_sanitize ()
sed \
-e 's/^Date: Fri, 05 Jan 2001 .*0000/Date: GENERATED_DATE/'
}
+
+notmuch_uuid_sanitize ()
+{
+ sed 's/[0-9a-f]\{8\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{12\}/UUID/g'
+}
+
+notmuch_built_with_sanitize ()
+{
+ sed 's/^built_with[.]\(.*\)=.*$/built_with.\1=something/'
+}
+
+notmuch_config_sanitize ()
+{
+ notmuch_dir_sanitize | notmuch_built_with_sanitize
+}
+
# End of notmuch helper functions
# Use test_set_prereq to tell that a particular prerequisite is available.
-# The prerequisite can later be checked for in two ways:
-#
-# - Explicitly using test_have_prereq.
#
-# - Implicitly by specifying the prerequisite tag in the calls to
-# test_expect_{success,failure,code}.
+# The prerequisite can later be checked for by using test_have_prereq.
#
# The single parameter is the prerequisite tag (a simple word, in all
# capital letters by convention).
}
test_failure_ () {
+ print_test_description
if test "$test_subtest_known_broken_" = "t"; then
test_known_broken_failure_ "$@"
return
fi
test_failure=$(($test_failure + 1))
- print_test_description
test_failure_message_ "FAIL" "$test_subtest_name" "$@"
test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
return 1
say_color error "%-6s" "$1"
echo " $2"
shift 2
- echo "$@" | sed -e 's/^/ /'
+ if [ "$#" != "0" ]; then
+ echo "$@" | sed -e 's/^/ /'
+ fi
if test "$verbose" != "t"; then cat test.output; fi
}
test_known_broken_failure_ () {
test_reset_state_
test_broken=$(($test_broken+1))
- test_failure_message_ "BROKEN" "$test_subtest_name" "$@"
+ if [ -z "$NOTMUCH_TEST_QUIET" ]; then
+ test_failure_message_ "BROKEN" "$test_subtest_name" "$@"
+ else
+ test_failure_message_ "BROKEN" "$test_subtest_name"
+ fi
return 1
}
break
esac
done
- if test -z "$to_skip" && test -n "$prereq" &&
- ! test_have_prereq "$prereq"
- then
- to_skip=t
- fi
case "$to_skip" in
t)
test_report_skip_ "$@"
}
test_expect_success () {
- test "$#" = 3 && { prereq=$1; shift; } || prereq=
- test "$#" = 2 ||
- error "bug in the test script: not 2 or 3 parameters to test-expect-success"
- test_subtest_name="$1"
- test_reset_state_
- if ! test_skip "$@"
+ exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_success without test_begin_subtest"
+ fi
+ inside_subtest=
+ test "$#" = 1 ||
+ error "bug in the test script: not 1 parameters to test_expect_success"
+
+ if ! test_skip "$test_subtest_name"
then
- test_run_ "$2"
+ test_run_ "$1"
run_ret="$?"
# test_run_ may update missing external prerequisites
test_check_missing_external_prereqs_ "$@" ||
then
test_ok_
else
- test_failure_ "$2"
+ test_failure_ "$1"
fi
fi
}
test_expect_code () {
- test "$#" = 4 && { prereq=$1; shift; } || prereq=
- test "$#" = 3 ||
- error "bug in the test script: not 3 or 4 parameters to test-expect-code"
- test_subtest_name="$2"
- test_reset_state_
- if ! test_skip "$@"
+ exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_code without test_begin_subtest"
+ fi
+ inside_subtest=
+ test "$#" = 2 ||
+ error "bug in the test script: not 2 parameters to test_expect_code"
+
+ if ! test_skip "$test_subtest_name"
then
- test_run_ "$3"
+ test_run_ "$2"
run_ret="$?"
# test_run_ may update missing external prerequisites,
test_check_missing_external_prereqs_ "$@" ||
then
test_ok_
else
- test_failure_ "exit code $eval_ret, expected $1" "$3"
+ test_failure_ "exit code $eval_ret, expected $1" "$2"
fi
fi
}
-# test_external runs external test scripts that provide continuous
-# test output about their progress, and succeeds/fails on
-# zero/non-zero exit code. It outputs the test output on stdout even
-# in non-verbose mode, and announces the external script with "* run
-# <n>: ..." before running it. When providing relative paths, keep in
-# mind that all scripts run in "trash directory".
-# Usage: test_external description command arguments...
-# Example: test_external 'Perl API' perl ../path/to/test.pl
-test_external () {
- test "$#" = 4 && { prereq=$1; shift; } || prereq=
- test "$#" = 3 ||
- error >&6 "bug in the test script: not 3 or 4 parameters to test_external"
- test_subtest_name="$1"
- shift
- test_reset_state_
- if ! test_skip "$test_subtest_name" "$@"
- then
- # Announce the script to reduce confusion about the
- # test output that follows.
- say_color "" " run $test_count: $descr ($*)"
- # Run command; redirect its stderr to &4 as in
- # test_run_, but keep its stdout on our stdout even in
- # non-verbose mode.
- "$@" 2>&4
- if [ "$?" = 0 ]
- then
- test_ok_
- else
- test_failure_ "$@"
- fi
- fi
-}
-
-# Like test_external, but in addition tests that the command generated
-# no output on stderr.
-test_external_without_stderr () {
- # The temporary file has no (and must have no) security
- # implications.
- tmp="$TMPDIR"; if [ -z "$tmp" ]; then tmp=/tmp; fi
- stderr="$tmp/git-external-stderr.$$.tmp"
- test_external "$@" 4> "$stderr"
- [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
- test_subtest_name="no stderr: $1"
- shift
- if [ ! -s "$stderr" ]; then
- rm "$stderr"
- test_ok_
- else
- if [ "$verbose" = t ]; then
- output=`echo; echo Stderr is:; cat "$stderr"`
- else
- output=
- fi
- # rm first in case test_failure exits.
- rm "$stderr"
- test_failure_ "$@" "$output"
- fi
-}
-
# This is not among top-level (test_expect_success)
# but is a prefix that can be used in the test script, like:
#
fi
server_name="notmuch-test-suite-$$"
# start a detached session with an emacs server
- # user's TERM (or 'vt100' in case user's TERM is unset, empty
- # or 'dumb') is given to dtach which assumes a minimally
+ # user's TERM (or 'vt100' in case user's TERM is known dumb
+ # or unknown) is given to dtach which assumes a minimally
# VT100-compatible terminal -- and emacs inherits that
- TERM=$DTACH_TERM dtach -n "$TEST_TMPDIR/emacs-dtach-socket.$$" \
+ TERM=$SMART_TERM dtach -n "$TEST_TMPDIR/emacs-dtach-socket.$$" \
sh -c "stty rows 24 cols 80; exec '$TMP_DIRECTORY/run_emacs' \
--no-window-system \
$load_emacs_tests \
}
test_python() {
- export LD_LIBRARY_PATH=$TEST_DIRECTORY/../lib
- export PYTHONPATH=$TEST_DIRECTORY/../bindings/python
-
- # Some distros (e.g. Arch Linux) ship Python 2.* as /usr/bin/python2,
- # most others as /usr/bin/python. So first try python2, and fallback to
- # python if python2 doesn't exist.
- cmd=python2
- [[ ${test_missing_external_prereq_[python2]} == t ]] && cmd=python
+ # Note: if there is need to print debug information from python program,
+ # use stdout = os.fdopen(6, 'w') or stderr = os.fdopen(7, 'w')
+ PYTHONPATH="$NOTMUCH_SRCDIR/bindings/python${PYTHONPATH:+:$PYTHONPATH}" \
+ $NOTMUCH_PYTHON -B - > OUTPUT
+}
- (echo "import sys; _orig_stdout=sys.stdout; sys.stdout=open('OUTPUT', 'w')"; cat) \
- | $cmd -
+test_ruby() {
+ MAIL_DIR=$MAIL_DIR ruby -I $TEST_DIRECTORY/../bindings/ruby> OUTPUT
}
test_C () {
exec_file="test${test_count}"
test_file="${exec_file}.c"
cat > ${test_file}
- export LD_LIBRARY_PATH=${TEST_DIRECTORY}/../lib
- ${TEST_CC} ${TEST_CFLAGS} -I${TEST_DIRECTORY}/../lib -o ${exec_file} ${test_file} -L${TEST_DIRECTORY}/../lib/ -lnotmuch -ltalloc
+ ${TEST_CC} ${TEST_CFLAGS} -I${TEST_DIRECTORY} -I${NOTMUCH_SRCDIR}/lib -o ${exec_file} ${test_file} -L${TEST_DIRECTORY}/../lib/ -lnotmuch -ltalloc
echo "== stdout ==" > OUTPUT.stdout
echo "== stderr ==" > OUTPUT.stderr
./${exec_file} "$@" 1>>OUTPUT.stdout 2>>OUTPUT.stderr
- sed "s,${PWD},CWD,g" OUTPUT.stdout OUTPUT.stderr > OUTPUT
+ notmuch_dir_sanitize OUTPUT.stdout OUTPUT.stderr > OUTPUT
}
}
-. ./test-lib-common.sh
+. ./test-lib-common.sh || exit 1
emacs_generate_script
ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
rm -f y
+# convert variable from configure to more convenient form
+case "$NOTMUCH_DEFAULT_XAPIAN_BACKEND" in
+ glass)
+ db_ending=glass
+ ;;
+ chert)
+ db_ending=DB
+ ;;
+ *)
+ error "Unknown Xapian backend $NOTMUCH_DEFAULT_XAPIAN_BACKEND"
+esac
# declare prerequisites for external binaries used in tests
test_declare_external_prereq dtach
test_declare_external_prereq emacs
test_declare_external_prereq ${TEST_EMACSCLIENT}
-test_declare_external_prereq gdb
+test_declare_external_prereq ${TEST_GDB}
test_declare_external_prereq gpg
-test_declare_external_prereq python
-test_declare_external_prereq python2
+test_declare_external_prereq openssl
+test_declare_external_prereq gpgsm
+test_declare_external_prereq ${NOTMUCH_PYTHON}