+# -*- makefile -*-
+
+# Here's the (hopefully simple) versioning scheme.
+#
+# Releases of notmuch have a two-digit version (0.1, 0.2, etc.). We
+# increment the second digit for each release and increment the first
+# digit when we reach particularly major milestones of usability.
+#
+# Between releases, (such as when compiling notmuch from the git
+# repository), we let git to append identification of the actual
+# commit.
+PACKAGE=notmuch
+VERSION:=$(shell if [ -f version ]; then cat version; else git describe --match '[0-9].[0-9]*'; fi)
+
+RELEASE_HOST=notmuchmail.org
+RELEASE_DIR=/srv/notmuchmail.org/www/releases
+RELEASE_URL=http://notmuchmail.org/releases
+TAR_FILE=$(PACKAGE)-$(VERSION).tar.gz
+SHA1_FILE=$(TAR_FILE).sha1
+GPG_FILE=$(SHA1_FILE).asc
+
+# Get settings from the output of configure by running it to generate
+# Makefile.config if it doesn't exist yet. And add Makefile.config to
+# our global dependency list.
+include Makefile.config
+global_deps += Makefile.config
+Makefile.config: configure
+ @echo ""
+ @echo "Note: Calling ./configure with no command-line arguments. This is often fine,"
+ @echo " but if you want to specify any arguments (such as an alternate prefix"
+ @echo " into which to install), call ./configure explicitly and then make again."
+ @echo " See \"./configure --help\" for more details."
+ @echo ""
+ ./configure
+
+# Sub-directory Makefile.local fragments can append to these variables
+# to have directory-specific cflags as necessary.
+extra_cflags :=
+extra_cxxflags :=
+
+# Smash together user's values with our extra values
+FINAL_CFLAGS = -DNOTMUCH_VERSION=$(VERSION) $(CFLAGS) $(WARN_CFLAGS) $(CONFIGURE_CFLAGS) $(extra_cflags)
+FINAL_CXXFLAGS = $(CXXFLAGS) $(WARN_CXXFLAGS) $(CONFIGURE_CXXFLAGS) $(extra_cflags) $(extra_cxxflags)
+FINAL_NOTMUCH_LDFLAGS = $(LDFLAGS) -Llib -lnotmuch
+FINAL_LIBNOTMUCH_LDFLAGS = $(LDFLAGS) $(CONFIGURE_LDFLAGS)
+
+.PHONY: all
+all: notmuch notmuch-shared notmuch.1.gz
+ifeq ($(MAKECMDGOALS),)
+ifeq ($(shell cat .first-build-message),)
+ @NOTMUCH_FIRST_BUILD=1 $(MAKE) --no-print-directory all
+ @echo ""
+ @echo "Compilation of notmuch is now complete. You can install notmuch with:"
+ @echo ""
+ @echo " make install"
+ @echo ""
+ @echo "Note that depending on the prefix to which you are installing"
+ @echo "you may need root permission (such as \"sudo make install\")."
+ @echo "See \"./configure --help\" for help on setting an alternate prefix."
+ @echo Printed > .first-build-message
+endif
+endif
+
+$(TAR_FILE):
+ git archive --format=tar --prefix=$(PACKAGE)-$(VERSION)/ HEAD > $(TAR_FILE).tmp
+ echo $(VERSION) > version
+ tar --append -f $(TAR_FILE).tmp --transform s_^_$(PACKAGE)-$(VERSION)/_ version
+ rm version
+ gzip < $(TAR_FILE).tmp > $(TAR_FILE)
+ @echo "Source is ready for release in $(TAR_FILE)"
+
+$(SHA1_FILE): $(TAR_FILE)
+ sha1sum $^ > $@
+
+$(GPG_FILE): $(SHA1_FILE)
+ @echo "Please enter your GPG password to sign the checksum."
+ gpg --armor --sign $^
+
+.PHONY: dist
+dist: $(TAR_FILE)
+
+# We invoke make recursively only to force ordering of our phony
+# targets in the case of parallel invocation of make (-j).
+.PHONY: release
+release: release-verify-newer
+ $(MAKE) release-upload
+ @echo "Please send a release announcement as follows:"
+ @echo ""
+ $(MAKE) release-message
+ $(MAKE) release-message > $(PACKAGE)-$(VERSION).announce
+ @echo "(This message is also available in $(PACKAGE)-$(VERSION).announce"
+
+.PHONY: release-upload
+release-upload: $(TAR_FILE) $(SHA1_FILE) $(GPG_FILE)
+ mkdir -p releases
+ scp $(TAR_FILE) $(SHA1_FILE) $(GPG_FILE) $(RELEASE_HOST):$(RELEASE_DIR)
+ mv $(TAR_FILE) $(SHA1_FILE) $(GPG_FILE) releases
+ ssh $(RELEASE_HOST) "rm -f $(RELEASE_DIR)/LATEST-$(PACKAGE)-[0-9]* && ln -s $(TAR_FILE) $(RELEASE_DIR)/LATEST-$(PACKAGE)-$(VERSION)"
+ git tag -s -m "$(PACKAGE) $(VERSION) release" $(VERSION)
+ git push origin $(VERSION)
+
+.PHONY: release-message
+release-message:
+ @echo "To: notmuch@notmuchmail.org"
+ @echo "Subject: $(PACKAGE) release $(VERSION) now available"
+ @echo ""
+ @echo "Where to obtain notmuch $(VERSION)"
+ @echo "==========================="
+ @echo " $(RELEASE_URL)/$(TAR_FILE)"
+ @echo ""
+ @echo "Which can be verified with:"
+ @echo ""
+ @echo " $(RELEASE_URL)/$(SHA1_FILE)"
+ @echo -n " "
+ @cat releases/$(SHA1_FILE)
+ @echo ""
+ @echo " $(RELEASE_URL)/$(GPG_FILE)"
+ @echo " (signed by `getent passwd "$$USER" | cut -d: -f 5 | cut -d, -f 1`)"
+ @echo ""
+ @echo "What's new in notmuch $(VERSION)"
+ @echo "========================="
+ @sed -ne '/^[Nn]otmuch 0.1/{n;n;b NEWS}; d; :NEWS /^===/q; {p;n;b NEWS}' < NEWS | head -n -2
+ @echo ""
+ @echo "What is notmuch"
+ @echo "==============="
+ @echo "Notmuch is a system for indexing, searching, reading, and tagging"
+ @echo "large collections of email messages in maildir or mh format. It uses"
+ @echo "the Xapian library to provide fast, full-text search with a convenient"
+ @echo "search syntax."
+ @echo ""
+ @echo "For more about notmuch, see http://notmuchmail.org"
+
+
+.PHONY: release-verify-version
+release-verify-version:
+ @echo -n "Checking that $(VERSION) is a two-component version..."
+ @if echo $(VERSION) | grep -q -v -x '[0-9]*\.[0-9]*'; then \
+ (echo "Ouch." && \
+ echo "Before releasing the notmuch version should be a two-component value." && false);\
+ else :; fi
+ @echo "Good."
+
+.PHONY: release-verify-newer
+release-verify-newer: release-verify-version
+ @echo -n "Checking that no $(VERSION) release already exists..."
+ @ssh $(RELEASE_HOST) test ! -e $(RELEASE_DIR)/$(TAR_FILE) \
+ || (echo "Ouch." && echo "Found: $(RELEASE_HOST):$(RELEASE_DIR)/$(TAR_FILE)" \
+ && echo "Refusing to replace an existing release." && false)
+ @echo "Good."
+
+# The user has not set any verbosity, default to quiet mode and inform the
+# user how to enable verbose compiles.
+ifeq ($(V),)
+quiet_DOC := "Use \"$(MAKE) V=1\" to see the verbose compile lines.\n"
+quiet = @printf $(quiet_DOC)$(eval quiet_DOC:=)"$1 $@\n"; $($(shell echo $1 | sed -e s'/ .*//'))
+endif
+# The user has explicitly enabled quiet compilation.
+ifeq ($(V),0)
+quiet = @printf "$1 $@\n"; $($(shell echo $1 | sed -e s'/ .*//'))
+endif
+# Otherwise, print the full command line.
+quiet ?= $($(shell echo $1 | sed -e s'/ .*//'))
+
+%.o: %.cc $(global_deps)
+ $(call quiet,CXX $(CXXFLAGS)) -c $(FINAL_CXXFLAGS) $< -o $@
+
+%.o: %.c $(global_deps)
+ $(call quiet,CC $(CFLAGS)) -c $(FINAL_CFLAGS) $< -o $@
+
+.deps/%.d: %.c $(global_deps)
+ @set -e; rm -f $@; mkdir -p $$(dirname $@) ; \
+ $(CC) -M $(CPPFLAGS) $(FINAL_CFLAGS) $< > $@.$$$$ 2>/dev/null ; \
+ sed 's,'$$(basename $*)'\.o[ :]*,$*.o $@ : ,g' < $@.$$$$ > $@; \
+ rm -f $@.$$$$
+
+.deps/%.d: %.cc $(global_deps)
+ @set -e; rm -f $@; mkdir -p $$(dirname $@) ; \
+ $(CXX) -M $(CPPFLAGS) $(FINAL_CXXFLAGS) $< > $@.$$$$ 2>/dev/null ; \
+ sed 's,'$$(basename $*)'\.o[ :]*,$*.o $@ : ,g' < $@.$$$$ > $@; \
+ rm -f $@.$$$$
+
+DEPS := $(SRCS:%.c=.deps/%.d)
+DEPS := $(DEPS:%.cc=.deps/%.d)
+-include $(DEPS)
+
+.PHONY : clean
+clean:
+ rm -f $(CLEAN); rm -rf .deps
+
+# We don't (yet) have any distributed files not in the upstream repository.
+# So distclean is currently identical to clean.
+.PHONY: distclean
+distclean: clean
+
notmuch_client_srcs = \
$(notmuch_compat_srcs) \
debugger.c \
json.c
notmuch_client_modules = $(notmuch_client_srcs:.c=.o)
-notmuch: $(notmuch_client_modules) lib/notmuch.a
- $(call quiet,CXX,$(LDFLAGS)) $^ $(FINAL_LDFLAGS) -o $@
+
+notmuch: $(notmuch_client_modules) lib/libnotmuch.a
+ $(call quiet,CC $(CFLAGS)) $^ $(FINAL_LIBNOTMUCH_LDFLAGS) -o $@
+
+notmuch-shared: $(notmuch_client_modules) lib/libnotmuch.so
+ $(call quiet,CC $(CFLAGS)) $(notmuch_client_modules) $(FINAL_NOTMUCH_LDFLAGS) -o $@
notmuch.1.gz: notmuch.1
- $(call quiet,gzip) --stdout $^ > $@
+ gzip --stdout $^ > $@
+.PHONY: install
install: all notmuch.1.gz
- for d in $(DESTDIR)$(prefix)/bin/ $(DESTDIR)$(prefix)/share/man/man1 ; \
- do \
- install -d $$d ; \
- done ;
- install notmuch $(DESTDIR)$(prefix)/bin/
- install -m0644 notmuch.1.gz $(DESTDIR)$(prefix)/share/man/man1/
+ mkdir -p $(DESTDIR)$(mandir)/man1
+ install -m0644 notmuch.1.gz $(DESTDIR)$(mandir)/man1/
+ mkdir -p $(DESTDIR)$(prefix)/bin/
+ install notmuch-shared $(DESTDIR)$(prefix)/bin/notmuch
+ifeq ($(MAKECMDGOALS), install)
+ @echo ""
+ @echo "Notmuch is now installed to $(DESTDIR)$(prefix)"
+ @echo ""
+ @echo "To run notmuch from emacs, each user should add the following line to ~/.emacs:"
+ @echo ""
+ @echo " (require 'notmuch)"
+ @echo ""
+ @echo "And should then run \"M-x notmuch\" from within emacs or run \"emacs -f notmuch\""
+endif
+.PHONY: install-desktop
install-desktop:
- install -d $(DESTDIR)$(desktop_dir)
+ mkdir -p $(DESTDIR)$(desktop_dir)
desktop-file-install --mode 0644 --dir $(DESTDIR)$(desktop_dir) notmuch.desktop
-install-bash:
- install -d $(DESTDIR)$(bash_completion_dir)
- install -m0644 contrib/notmuch-completion.bash \
- $(DESTDIR)$(bash_completion_dir)/notmuch
-
-install-zsh:
- install -d $(DESTDIR)$(zsh_completion_dir)
- install -m0644 contrib/notmuch-completion.zsh \
- $(DESTDIR)$(zsh_completion_dir)/notmuch
-
SRCS := $(SRCS) $(notmuch_client_srcs)
-CLEAN := $(CLEAN) notmuch $(notmuch_client_modules) notmuch.elc notmuch.1.gz
+CLEAN := $(CLEAN) notmuch notmuch-shared $(notmuch_client_modules) notmuch.elc notmuch.1.gz
projects / notmuch / blobdiff