exit 1
fi
+# Make sure echo builtin does not expand backslash-escape sequences by default.
+shopt -u xpg_echo
+
+this_test=${0##*/}
+this_test=${this_test%.sh}
+this_test_bare=${this_test#T[0-9][0-9][0-9]-}
+
# if --tee was passed, write the output not only to the terminal, but
# additionally to the file test-results/$BASENAME.out, too.
case "$GIT_TEST_TEE_STARTED, $* " in
;;
*' --tee '*|*' --va'*)
mkdir -p test-results
- BASE=test-results/$(basename "$0" .sh)
+ BASE=test-results/$this_test
(GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1;
echo $? > $BASE.exit) | tee $BASE.out
test "$(cat $BASE.exit)" = 0
;;
esac
+# Save STDOUT to fd 6 and STDERR to fd 7.
+exec 6>&1 7>&2
+# Make xtrace debugging (when used) use redirected STDERR, with verbose lead:
+BASH_XTRACEFD=7
+export PS4='+(${BASH_SOURCE}:${LINENO}): ${FUNCNAME[0]:+${FUNCNAME[0]}(): }'
+
# Keep the original TERM for say_color and test_emacs
ORIGINAL_TERM=$TERM
fi
TEST_EMACS=${TEST_EMACS:-${EMACS:-emacs}}
TEST_EMACSCLIENT=${TEST_EMACSCLIENT:-emacsclient}
+TEST_CC=${TEST_CC:-cc}
+TEST_CFLAGS=${TEST_CFLAGS:-"-g -O0"}
# Protect ourselves from common misconfiguration to export
# CDPATH into the environment
exit 0
fi
-echo $(basename "$0"): "Testing ${test_description}"
-
-exec 5>&1
+test_description_printed=
+print_test_description ()
+{
+ test -z "$test_description_printed" || return 0
+ echo
+ echo $this_test: "Testing ${test_description}"
+ test_description_printed=1
+}
+if [ -z "$NOTMUCH_TEST_QUIET" ]
+then
+ print_test_description
+fi
test_failure=0
test_count=0
then
exit $code
else
- exec >&5
+ exec >&6
say_color error '%-6s' FATAL
echo " $test_subtest_name"
echo
die_signal () {
_die_common
- echo >&5 "FATAL: $0: interrupted by signal" $((code - 128))
+ echo >&6 "FATAL: $0: interrupted by signal" $((code - 128))
exit $code
}
else
template[subject]="Test message #${gen_msg_cnt}"
fi
+ elif [ "${template[subject]}" = "@FORCE_EMPTY" ]; then
+ template[subject]=""
fi
if [ -z "${template[date]}" ]; then
- template[date]="Fri, 05 Jan 2001 15:43:57 +0000"
+ # we use decreasing timestamps here for historical reasons;
+ # the existing test suite when we converted to unique timestamps just
+ # happened to have signicantly fewer failures with that choice.
+ local date_secs=$((978709437 - gen_msg_cnt))
+ # printf %(..)T is bash 4.2+ feature. use perl fallback if needed...
+ TZ=UTC printf -v template[date] "%(%a, %d %b %Y %T %z)T" $date_secs 2>/dev/null ||
+ template[date]=`perl -le 'use POSIX "strftime";
+ @time = gmtime '"$date_secs"';
+ print strftime "%a, %d %b %Y %T +0000", @time'`
fi
additional_headers=""
test_emacs \
"(let ((message-send-mail-function 'message-smtpmail-send-it)
+ (mail-host-address \"example.com\")
(smtpmail-smtp-server \"localhost\")
(smtpmail-smtp-service \"25025\"))
- (notmuch-hello)
(notmuch-mua-mail)
(message-goto-to)
(insert \"test_suite@notmuchmail.org\nDate: 01 Jan 2000 12:00:00 -0000\")
notmuch new >/dev/null
}
+# Pretend to deliver a message with emacs. Really save it to a file
+# and add it to the database
+#
+# Uses emacs to generate and deliver a message to the mail store.
+# Accepts arbitrary extra emacs/elisp functions to modify the message
+# before sending, which is useful to doing things like attaching files
+# to the message and encrypting/signing.
+emacs_fcc_message ()
+{
+ local subject="$1"
+ local body="$2"
+ shift 2
+ # before we can send a message, we have to prepare the FCC maildir
+ mkdir -p "$MAIL_DIR"/sent/{cur,new,tmp}
+
+ test_emacs \
+ "(let ((message-send-mail-function (lambda () t))
+ (mail-host-address \"example.com\"))
+ (notmuch-mua-mail)
+ (message-goto-to)
+ (insert \"test_suite@notmuchmail.org\nDate: 01 Jan 2000 12:00:00 -0000\")
+ (message-goto-subject)
+ (insert \"${subject}\")
+ (message-goto-body)
+ (insert \"${body}\")
+ $@
+ (message-send-and-exit))" || return 1
+ notmuch new >/dev/null
+}
+
# Generate a corpus of email and add it to the database.
#
# This corpus is fixed, (it happens to be 50 messages from early in
fi
test_subtest_name="$1"
test_reset_state_
- # Remember stdout and stderr file descriptors and redirect test
- # output to the previously prepared file descriptors 3 and 4 (see
- # below)
+ # Redirect test output to the previously prepared file descriptors
+ # 3 and 4 (see below)
if test "$verbose" != "t"; then exec 4>test.output 3>&4; fi
- exec 6>&1 7>&2 >&3 2>&4
+ exec >&3 2>&4
inside_subtest=t
}
# The test suite forces LC_ALL=C, but this causes Python 3 to
# decode stdin as ASCII. We need to read JSON in UTF-8, so
# override Python's stdio encoding defaults.
- output=$(echo "$1" | PYTHONIOENCODING=utf-8 python -mjson.tool \
+ output=$(echo "$1" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
|| echo "$1")
- expected=$(echo "$2" | PYTHONIOENCODING=utf-8 python -mjson.tool \
+ expected=$(echo "$2" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
|| echo "$2")
shift 2
test_expect_equal "$output" "$expected" "$@"
}
+# Sort the top-level list of JSON data from stdin.
+test_sort_json () {
+ PYTHONIOENCODING=utf-8 python -c \
+ "import sys, json; json.dump(sorted(json.load(sys.stdin)),sys.stdout)"
+}
+
test_emacs_expect_t () {
test "$#" = 2 && { prereq=$1; shift; } || prereq=
test "$#" = 1 ||
perl -pe 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/'
}
+notmuch_search_files_sanitize()
+{
+ sed -e "s,$MAIL_DIR,MAIL_DIR,"
+}
+
NOTMUCH_SHOW_FILENAME_SQUELCH='s,filename:.*/mail,filename:/XXX/mail,'
notmuch_show_sanitize ()
{
{
sed \
-e 's| filename:.*| filename:XXXXX|' \
- -e 's| id:[^ ]* | id:XXXXX |'
+ -e 's| id:[^ ]* | id:XXXXX |' | \
+ notmuch_date_sanitize
}
notmuch_json_show_sanitize ()
{
sed \
-e 's|"id": "[^"]*",|"id": "XXXXX",|g' \
- -e 's|"filename": "/[^"]*",|"filename": "YYYYY",|g'
+ -e 's|"Date": "Fri, 05 Jan 2001 [^"]*0000"|"Date": "GENERATED_DATE"|g' \
+ -e 's|"filename": "signature.asc",||g' \
+ -e 's|"filename": "/[^"]*",|"filename": "YYYYY",|g' \
+ -e 's|"timestamp": 97.......|"timestamp": 42|g'
}
+notmuch_emacs_error_sanitize ()
+{
+ local command=$1
+ shift
+ for file in "$@"; do
+ echo "=== $file ==="
+ cat "$file"
+ done | sed \
+ -e 's/^\[.*\]$/[XXX]/' \
+ -e "s|^\(command: \)\{0,1\}/.*/$command|\1YYY/$command|"
+}
+
+notmuch_date_sanitize ()
+{
+ sed \
+ -e 's/^Date: Fri, 05 Jan 2001 .*0000/Date: GENERATED_DATE/'
+}
# End of notmuch helper functions
# Use test_set_prereq to tell that a particular prerequisite is available.
return
fi
test_success=$(($test_success + 1))
+ if test -n "$NOTMUCH_TEST_QUIET"; then
+ return 0
+ fi
say_color pass "%-6s" "PASS"
echo " $test_subtest_name"
}
return
fi
test_failure=$(($test_failure + 1))
+ print_test_description
test_failure_message_ "FAIL" "$test_subtest_name" "$@"
test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
return 1
case $this_test.$test_count in
$skp)
to_skip=t
+ break
+ esac
+ case $this_test_bare.$test_count in
+ $skp)
+ to_skip=t
+ break
esac
done
if test -z "$to_skip" && test -n "$prereq" &&
test_external () {
test "$#" = 4 && { prereq=$1; shift; } || prereq=
test "$#" = 3 ||
- error >&5 "bug in the test script: not 3 or 4 parameters to test_external"
+ error >&6 "bug in the test script: not 3 or 4 parameters to test_external"
test_subtest_name="$1"
shift
test_reset_state_
GIT_EXIT_OK=t
test_results_dir="$TEST_DIRECTORY/test-results"
mkdir -p "$test_results_dir"
- test_results_path="$test_results_dir/${0%.sh}"
+ test_results_path="$test_results_dir/$this_test"
echo "total $test_count" >> $test_results_path
echo "success $test_success" >> $test_results_path
echo "failed $test_failure" >> $test_results_path
echo "" >> $test_results_path
- echo
-
[ -n "$EMACS_SERVER" ] && test_emacs '(kill-emacs)'
if [ "$test_failure" = "0" ]; then
# Here's what we are using here:
#
-# --no-init-file Don't load users ~/.emacs
-#
-# --no-site-file Don't load the site-wide startup stuff
+# --quick Use minimal customization. This implies --no-init-file,
+# --no-site-file and (emacs 24) --no-site-lisp
#
# --directory Ensure that the local elisp sources are found
#
# --load Force loading of notmuch.el and test-lib.el
-exec ${TEST_EMACS} --no-init-file --no-site-file \
+exec ${TEST_EMACS} --quick \
--directory "$TEST_DIRECTORY/../emacs" --load notmuch.el \
--directory "$TEST_DIRECTORY" --load test-lib.el \
"\$@"
test -z "$missing_dependencies" || return
if [ -z "$EMACS_SERVER" ]; then
- emacs_tests="$(basename $0).el"
+ emacs_tests="${this_test_bare}.el"
if [ -f "$TEST_DIRECTORY/$emacs_tests" ]; then
load_emacs_tests="--eval '(load \"$emacs_tests\")'"
else
rm -f OUTPUT
touch OUTPUT
- ${TEST_EMACSCLIENT} --socket-name="$EMACS_SERVER" --eval "(progn $@)"
+ ${TEST_EMACSCLIENT} --socket-name="$EMACS_SERVER" --eval "(notmuch-test-progn $@)"
}
test_python() {
export LD_LIBRARY_PATH=$TEST_DIRECTORY/../lib
export PYTHONPATH=$TEST_DIRECTORY/../bindings/python
- # Some distros (e.g. Arch Linux) ship Python 2.* as /usr/bin/python2,
- # most others as /usr/bin/python. So first try python2, and fallback to
- # python if python2 doesn't exist.
- cmd=python2
- [[ ${test_missing_external_prereq_[python2]} == t ]] && cmd=python
-
(echo "import sys; _orig_stdout=sys.stdout; sys.stdout=open('OUTPUT', 'w')"; cat) \
- | $cmd -
+ | $NOTMUCH_PYTHON -
+}
+
+test_ruby() {
+ export LD_LIBRARY_PATH=$TEST_DIRECTORY/../lib
+ MAIL_DIR=$MAIL_DIR ruby -I $TEST_DIRECTORY/../bindings/ruby> OUTPUT
}
+test_C () {
+ exec_file="test${test_count}"
+ test_file="${exec_file}.c"
+ cat > ${test_file}
+ export LD_LIBRARY_PATH=${TEST_DIRECTORY}/../lib
+ ${TEST_CC} ${TEST_CFLAGS} -I${TEST_DIRECTORY}/../lib -o ${exec_file} ${test_file} -L${TEST_DIRECTORY}/../lib/ -lnotmuch -ltalloc
+ echo "== stdout ==" > OUTPUT.stdout
+ echo "== stderr ==" > OUTPUT.stderr
+ ./${exec_file} "$@" 1>>OUTPUT.stdout 2>>OUTPUT.stderr
+ sed "s,${PWD},CWD,g" OUTPUT.stdout OUTPUT.stderr > OUTPUT
+}
+
+
# Creates a script that counts how much time it is executed and calls
# notmuch. $notmuch_counter_command is set to the path to the
# generated script. Use notmuch_counter_value() function to get the
# Use -P to resolve symlinks in our working directory so that the cwd
# in subprocesses like git equals our $PWD (for pathname comparisons).
-cd -P "$test" || error "Cannot setup test environment"
+cd -P "$test" || error "Cannot set up test environment"
if test "$verbose" = "t"
then
exec 4>test.output 3>&4
fi
-this_test=${0##*/}
for skp in $NOTMUCH_SKIP_TESTS
do
to_skip=
case "$this_test" in
$skp)
to_skip=t
+ break
+ esac
+ case "$this_test_bare" in
+ $skp)
+ to_skip=t
+ break
esac
done
case "$to_skip" in
test_declare_external_prereq ${TEST_EMACSCLIENT}
test_declare_external_prereq gdb
test_declare_external_prereq gpg
-test_declare_external_prereq python
-test_declare_external_prereq python2
+test_declare_external_prereq ${NOTMUCH_PYTHON}
projects / notmuch / blobdiff