fi
TEST_EMACS=${TEST_EMACS:-${EMACS:-emacs}}
TEST_EMACSCLIENT=${TEST_EMACSCLIENT:-emacsclient}
+TEST_GDB=${TEST_GDB:-gdb}
TEST_CC=${TEST_CC:-cc}
TEST_CFLAGS=${TEST_CFLAGS:-"-g -O0"}
# For emacsclient
unset ALTERNATE_EDITOR
-# Convenience
-#
-# A regexp to match 5 and 40 hexdigits
-_x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
-_x40="$_x05$_x05$_x05$_x05$_x05$_x05$_x05$_x05"
-
-_x04='[0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
-_x32="$_x04$_x04$_x04$_x04$_x04$_x04$_x04$_x04"
-
# Each test should start with something like this, after copyright notices:
#
# test_description='Description of this test...
while test "$#" -ne 0
do
case "$1" in
- -d|--d|--de|--deb|--debu|--debug)
+ -d|--debug)
debug=t; shift ;;
- -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate)
+ -i|--immediate)
immediate=t; shift ;;
- -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests)
- GIT_TEST_LONG=t; export GIT_TEST_LONG; shift ;;
- -h|--h|--he|--hel|--help)
+ -h|--help)
help=t; shift ;;
- -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
+ -v|--verbose)
verbose=t; shift ;;
- -q|--q|--qu|--qui|--quie|--quiet)
+ -q|--quiet)
quiet=t; shift ;;
--with-dashes)
with_dashes=t; shift ;;
--no-python)
# noop now...
shift ;;
- --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
+ --valgrind)
valgrind=t; verbose=t; shift ;;
--tee)
shift ;; # was handled already
GIT_EXIT_OK=
# Note: TEST_TMPDIR *NOT* exported!
TEST_TMPDIR=$(mktemp -d "${TMPDIR:-/tmp}/notmuch-test-$$.XXXXXX")
+# Put GNUPGHOME in TMPDIR to avoid problems with long paths.
+export GNUPGHOME="${TEST_TMPDIR}/gnupg"
trap 'trap_exit' EXIT
trap 'trap_signal' HUP INT TERM
-test_decode_color () {
- sed -e 's/.\[1m/<WHITE>/g' \
- -e 's/.\[31m/<RED>/g' \
- -e 's/.\[32m/<GREEN>/g' \
- -e 's/.\[33m/<YELLOW>/g' \
- -e 's/.\[34m/<BLUE>/g' \
- -e 's/.\[35m/<MAGENTA>/g' \
- -e 's/.\[36m/<CYAN>/g' \
- -e 's/.\[m/<RESET>/g'
-}
-
-q_to_nul () {
- perl -pe 'y/Q/\000/'
-}
-
-q_to_cr () {
- tr Q '\015'
-}
-
-append_cr () {
- sed -e 's/$/Q/' | tr Q '\015'
-}
-
-remove_cr () {
- tr '\015' Q | sed -e 's/Q$//'
-}
-
# Generate a new message in the mail directory, with a unique message
# ID and subject. The message is not added to the index.
#
test_expect_equal ()
{
exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_equal without test_begin_subtest"
+ fi
inside_subtest=
test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
test_expect_equal_file ()
{
exec 1>&6 2>&7 # Restore stdout and stderr
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_expect_equal_file without test_begin_subtest"
+ fi
inside_subtest=
test "$#" = 3 && { prereq=$1; shift; } || prereq=
test "$#" = 2 ||
# Sort the top-level list of JSON data from stdin.
test_sort_json () {
- PYTHONIOENCODING=utf-8 python -c \
+ PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -c \
"import sys, json; json.dump(sorted(json.load(sys.stdin)),sys.stdout)"
}
test "$#" = 2 && { prereq=$1; shift; } || prereq=
test "$#" = 1 ||
error "bug in the test script: not 1 or 2 parameters to test_emacs_expect_t"
+ if [ -z "$inside_subtest" ]; then
+ error "bug in the test script: test_emacs_expect_t without test_begin_subtest"
+ fi
# Run the test.
if ! test_skip "$test_subtest_name"
-e 's|"id": "[^"]*",|"id": "XXXXX",|g' \
-e 's|"Date": "Fri, 05 Jan 2001 [^"]*0000"|"Date": "GENERATED_DATE"|g' \
-e 's|"filename": "signature.asc",||g' \
- -e 's|"filename": "/[^"]*",|"filename": "YYYYY",|g' \
- -e 's|"timestamp": 97.......|"timestamp": 42|g'
+ -e 's|"filename": \["/[^"]*"\],|"filename": \["YYYYY"\],|g' \
+ -e 's|"timestamp": 97.......|"timestamp": 42|g' \
+ -e 's|"content-length": [1-9][0-9]*|"content-length": "NONZERO"|g'
}
notmuch_emacs_error_sanitize ()
}
test_failure_ () {
+ print_test_description
if test "$test_subtest_known_broken_" = "t"; then
test_known_broken_failure_ "$@"
return
fi
test_failure=$(($test_failure + 1))
- print_test_description
test_failure_message_ "FAIL" "$test_subtest_name" "$@"
test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
return 1
say_color error "%-6s" "$1"
echo " $2"
shift 2
- echo "$@" | sed -e 's/^/ /'
+ if [ "$#" != "0" ]; then
+ echo "$@" | sed -e 's/^/ /'
+ fi
if test "$verbose" != "t"; then cat test.output; fi
}
test_known_broken_failure_ () {
test_reset_state_
test_broken=$(($test_broken+1))
- test_failure_message_ "BROKEN" "$test_subtest_name" "$@"
+ if [ -z "$NOTMUCH_TEST_QUIET" ]; then
+ test_failure_message_ "BROKEN" "$test_subtest_name" "$@"
+ else
+ test_failure_message_ "BROKEN" "$test_subtest_name"
+ fi
return 1
}
fi
}
-# test_external runs external test scripts that provide continuous
-# test output about their progress, and succeeds/fails on
-# zero/non-zero exit code. It outputs the test output on stdout even
-# in non-verbose mode, and announces the external script with "* run
-# <n>: ..." before running it. When providing relative paths, keep in
-# mind that all scripts run in "trash directory".
-# Usage: test_external description command arguments...
-# Example: test_external 'Perl API' perl ../path/to/test.pl
-test_external () {
- test "$#" = 4 && { prereq=$1; shift; } || prereq=
- test "$#" = 3 ||
- error >&6 "bug in the test script: not 3 or 4 parameters to test_external"
- test_subtest_name="$1"
- shift
- test_reset_state_
- if ! test_skip "$test_subtest_name" "$@"
- then
- # Announce the script to reduce confusion about the
- # test output that follows.
- say_color "" " run $test_count: $descr ($*)"
- # Run command; redirect its stderr to &4 as in
- # test_run_, but keep its stdout on our stdout even in
- # non-verbose mode.
- "$@" 2>&4
- if [ "$?" = 0 ]
- then
- test_ok_
- else
- test_failure_ "$@"
- fi
- fi
-}
-
-# Like test_external, but in addition tests that the command generated
-# no output on stderr.
-test_external_without_stderr () {
- # The temporary file has no (and must have no) security
- # implications.
- tmp="$TMPDIR"; if [ -z "$tmp" ]; then tmp=/tmp; fi
- stderr="$tmp/git-external-stderr.$$.tmp"
- test_external "$@" 4> "$stderr"
- [ -f "$stderr" ] || error "Internal error: $stderr disappeared."
- test_subtest_name="no stderr: $1"
- shift
- if [ ! -s "$stderr" ]; then
- rm "$stderr"
- test_ok_
- else
- if [ "$verbose" = t ]; then
- output=`echo; echo Stderr is:; cat "$stderr"`
- else
- output=
- fi
- # rm first in case test_failure exits.
- rm "$stderr"
- test_failure_ "$@" "$output"
- fi
-}
-
# This is not among top-level (test_expect_success)
# but is a prefix that can be used in the test script, like:
#
test_declare_external_prereq dtach
test_declare_external_prereq emacs
test_declare_external_prereq ${TEST_EMACSCLIENT}
-test_declare_external_prereq gdb
+test_declare_external_prereq ${TEST_GDB}
test_declare_external_prereq gpg
test_declare_external_prereq openssl
test_declare_external_prereq gpgsm
projects / notmuch / blobdiff