X-Git-Url: https://git.notmuchmail.org/git?p=notmuch;a=blobdiff_plain;f=test%2Ftest-lib.sh;h=62e123d65aba8deae1f6e461ac8c4442562f608a;hp=568e89f18024cc8e4350236e8ca0eb3dad3dd4c9;hb=b183f2635eaf323066f26c7ca22d931d4f4ccd3a;hpb=f96ddb15f8d0145e1b877eb821e63d36dbabc71a diff --git a/test/test-lib.sh b/test/test-lib.sh index 568e89f1..62e123d6 100644 --- a/test/test-lib.sh +++ b/test/test-lib.sh @@ -1,5 +1,6 @@ # # Copyright (c) 2005 Junio C Hamano +# Copyright (c) 2010 Notmuch Developers # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -22,6 +23,13 @@ if [ ${BASH_VERSINFO[0]} -lt 4 ]; then exit 1 fi +# Make sure echo builtin does not expand backslash-escape sequences by default. +shopt -u xpg_echo + +this_test=${0##*/} +this_test=${this_test%.sh} +this_test_bare=${this_test#T[0-9][0-9][0-9]-} + # if --tee was passed, write the output not only to the terminal, but # additionally to the file test-results/$BASENAME.out, too. case "$GIT_TEST_TEE_STARTED, $* " in @@ -30,7 +38,7 @@ done,*) ;; *' --tee '*|*' --va'*) mkdir -p test-results - BASE=test-results/$(basename "$0" .sh) + BASE=test-results/$this_test (GIT_TEST_TEE_STARTED=done ${SHELL-sh} "$0" "$@" 2>&1; echo $? > $BASE.exit) | tee $BASE.out test "$(cat $BASE.exit)" = 0 @@ -38,9 +46,19 @@ done,*) ;; esac +# Save STDOUT to fd 6 and STDERR to fd 7. +exec 6>&1 7>&2 +# Make xtrace debugging (when used) use redirected STDERR, with verbose lead: +BASH_XTRACEFD=7 +export PS4='+(${BASH_SOURCE}:${LINENO}): ${FUNCNAME[0]:+${FUNCNAME[0]}(): }' + # Keep the original TERM for say_color and test_emacs ORIGINAL_TERM=$TERM +# dtach(1) provides more capable terminal environment to anything +# that requires more than dumb terminal... +[ x"${TERM:-dumb}" = xdumb ] && DTACH_TERM=vt100 || DTACH_TERM=$TERM + # For repeatability, reset the environment to known value. LANG=C LC_ALL=C @@ -49,7 +67,15 @@ TZ=UTC TERM=dumb export LANG LC_ALL PAGER TERM TZ GIT_TEST_CMP=${GIT_TEST_CMP:-diff -u} +if [[ ( -n "$TEST_EMACS" && -z "$TEST_EMACSCLIENT" ) || \ + ( -z "$TEST_EMACS" && -n "$TEST_EMACSCLIENT" ) ]]; then + echo "error: must specify both or neither of TEST_EMACS and TEST_EMACSCLIENT" >&2 + exit 1 +fi TEST_EMACS=${TEST_EMACS:-${EMACS:-emacs}} +TEST_EMACSCLIENT=${TEST_EMACSCLIENT:-emacsclient} +TEST_CC=${TEST_CC:-cc} +TEST_CFLAGS=${TEST_CFLAGS:-"-g -O0"} # Protect ourselves from common misconfiguration to export # CDPATH into the environment @@ -57,6 +83,9 @@ unset CDPATH unset GREP_OPTIONS +# For emacsclient +unset ALTERNATE_EDITOR + # Convenience # # A regexp to match 5 and 40 hexdigits @@ -71,7 +100,8 @@ _x32="$_x04$_x04$_x04$_x04$_x04$_x04$_x04$_x04" # test_description='Description of this test... # This test checks if command xyzzy does the right thing... # ' -# . ./test-lib.sh +# . ./test-lib.sh || exit 1 + [ "x$ORIGINAL_TERM" != "xdumb" ] && ( TERM=$ORIGINAL_TERM && export TERM && @@ -174,9 +204,18 @@ then exit 0 fi -echo $(basename "$0"): "Testing ${test_description}" - -exec 5>&1 +test_description_printed= +print_test_description () +{ + test -z "$test_description_printed" || return 0 + echo + echo $this_test: "Testing ${test_description}" + test_description_printed=1 +} +if [ -z "$NOTMUCH_TEST_QUIET" ] +then + print_test_description +fi test_failure=0 test_count=0 @@ -184,22 +223,39 @@ test_fixed=0 test_broken=0 test_success=0 -die () { +_die_common () { code=$? + trap - EXIT + set +ex rm -rf "$TEST_TMPDIR" +} + +die () { + _die_common if test -n "$GIT_EXIT_OK" then exit $code else - echo >&5 "FATAL: Unexpected exit with code $code" + exec >&6 + say_color error '%-6s' FATAL + echo " $test_subtest_name" + echo + echo "Unexpected exit while executing $0. Exit code $code." exit 1 fi } +die_signal () { + _die_common + echo >&6 "FATAL: $0: interrupted by signal" $((code - 128)) + exit $code +} + GIT_EXIT_OK= # Note: TEST_TMPDIR *NOT* exported! TEST_TMPDIR=$(mktemp -d "${TMPDIR:-/tmp}/notmuch-test-$$.XXXXXX") trap 'die' EXIT +trap 'die_signal' HUP INT TERM test_decode_color () { sed -e 's/.\[1m//g' \ @@ -323,10 +379,20 @@ generate_message () else template[subject]="Test message #${gen_msg_cnt}" fi + elif [ "${template[subject]}" = "@FORCE_EMPTY" ]; then + template[subject]="" fi if [ -z "${template[date]}" ]; then - template[date]="Fri, 05 Jan 2001 15:43:57 +0000" + # we use decreasing timestamps here for historical reasons; + # the existing test suite when we converted to unique timestamps just + # happened to have signicantly fewer failures with that choice. + local date_secs=$((978709437 - gen_msg_cnt)) + # printf %(..)T is bash 4.2+ feature. use perl fallback if needed... + TZ=UTC printf -v template[date] "%(%a, %d %b %Y %T %z)T" $date_secs 2>/dev/null || + template[date]=`perl -le 'use POSIX "strftime"; + @time = gmtime '"$date_secs"'; + print strftime "%a, %d %b %Y %T +0000", @time'` fi additional_headers="" @@ -350,6 +416,11 @@ ${additional_headers}" ${additional_headers}" fi + if [ ! -z "${template[bcc]}" ]; then + additional_headers="Bcc: ${template[bcc]} +${additional_headers}" + fi + if [ ! -z "${template[references]}" ]; then additional_headers="References: ${template[references]} ${additional_headers}" @@ -403,13 +474,16 @@ emacs_deliver_message () shift 2 # before we can send a message, we have to prepare the FCC maildir mkdir -p "$MAIL_DIR"/sent/{cur,new,tmp} - $TEST_DIRECTORY/smtp-dummy sent_message & - smtp_dummy_pid=$! + # eval'ing smtp-dummy --background will set smtp_dummy_pid + smtp_dummy_pid= + eval `$TEST_DIRECTORY/smtp-dummy --background sent_message` + test -n "$smtp_dummy_pid" || return 1 + test_emacs \ "(let ((message-send-mail-function 'message-smtpmail-send-it) + (mail-host-address \"example.com\") (smtpmail-smtp-server \"localhost\") (smtpmail-smtp-service \"25025\")) - (notmuch-hello) (notmuch-mua-mail) (message-goto-to) (insert \"test_suite@notmuchmail.org\nDate: 01 Jan 2000 12:00:00 -0000\") @@ -418,10 +492,42 @@ emacs_deliver_message () (message-goto-body) (insert \"${body}\") $@ - (message-send-and-exit))" - # opportunistically quit smtp-dummy in case above fails. - { echo QUIT > /dev/tcp/localhost/25025; } 2>/dev/null - wait ${smtp_dummy_pid} + (notmuch-mua-send-and-exit))" + + # In case message was sent properly, client waits for confirmation + # before exiting and resuming control here; therefore making sure + # that server exits by sending (KILL) signal to it is safe. + kill -9 $smtp_dummy_pid + notmuch new >/dev/null +} + +# Pretend to deliver a message with emacs. Really save it to a file +# and add it to the database +# +# Uses emacs to generate and deliver a message to the mail store. +# Accepts arbitrary extra emacs/elisp functions to modify the message +# before sending, which is useful to doing things like attaching files +# to the message and encrypting/signing. +emacs_fcc_message () +{ + local subject="$1" + local body="$2" + shift 2 + # before we can send a message, we have to prepare the FCC maildir + mkdir -p "$MAIL_DIR"/sent/{cur,new,tmp} + + test_emacs \ + "(let ((message-send-mail-function (lambda () t)) + (mail-host-address \"example.com\")) + (notmuch-mua-mail) + (message-goto-to) + (insert \"test_suite@notmuchmail.org\nDate: 01 Jan 2000 12:00:00 -0000\") + (message-goto-subject) + (insert \"${subject}\") + (message-goto-body) + (insert \"${body}\") + $@ + (notmuch-mua-send-and-exit))" || return 1 notmuch new >/dev/null } @@ -451,11 +557,10 @@ test_begin_subtest () fi test_subtest_name="$1" test_reset_state_ - # Remember stdout and stderr file descriptors and redirect test - # output to the previously prepared file descriptors 3 and 4 (see - # below) + # Redirect test output to the previously prepared file descriptors + # 3 and 4 (see below) if test "$verbose" != "t"; then exec 4>test.output 3>&4; fi - exec 6>&1 7>&2 >&3 2>&4 + exec >&3 2>&4 inside_subtest=t } @@ -478,12 +583,12 @@ test_expect_equal () if ! test_skip "$test_subtest_name" then if [ "$output" = "$expected" ]; then - test_ok_ "$test_subtest_name" + test_ok_ else testname=$this_test.$test_count echo "$expected" > $testname.expected echo "$output" > $testname.output - test_failure_ "$test_subtest_name" "$(diff -u $testname.expected $testname.output)" + test_failure_ "$(diff -u $testname.expected $testname.output)" fi fi } @@ -504,12 +609,12 @@ test_expect_equal_file () if ! test_skip "$test_subtest_name" then if diff -q "$file1" "$file2" >/dev/null ; then - test_ok_ "$test_subtest_name" + test_ok_ else testname=$this_test.$test_count cp "$file1" "$testname.$basename1" cp "$file2" "$testname.$basename2" - test_failure_ "$test_subtest_name" "$(diff -u "$testname.$basename1" "$testname.$basename2")" + test_failure_ "$(diff -u "$testname.$basename1" "$testname.$basename2")" fi fi } @@ -518,12 +623,23 @@ test_expect_equal_file () # canonicalized before diff'ing. If an argument cannot be parsed, it # is used unchanged so that there's something to diff against. test_expect_equal_json () { - output=$(echo "$1" | python -mjson.tool || echo "$1") - expected=$(echo "$2" | python -mjson.tool || echo "$2") + # The test suite forces LC_ALL=C, but this causes Python 3 to + # decode stdin as ASCII. We need to read JSON in UTF-8, so + # override Python's stdio encoding defaults. + output=$(echo "$1" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \ + || echo "$1") + expected=$(echo "$2" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \ + || echo "$2") shift 2 test_expect_equal "$output" "$expected" "$@" } +# Sort the top-level list of JSON data from stdin. +test_sort_json () { + PYTHONIOENCODING=utf-8 python -c \ + "import sys, json; json.dump(sorted(json.load(sys.stdin)),sys.stdout)" +} + test_emacs_expect_t () { test "$#" = 2 && { prereq=$1; shift; } || prereq= test "$#" = 1 || @@ -542,9 +658,9 @@ test_emacs_expect_t () { result=$(cat OUTPUT) if [ "$result" = t ] then - test_ok_ "$test_subtest_name" + test_ok_ else - test_failure_ "$test_subtest_name" "${result}" + test_failure_ "${result}" fi else # Restore state after the (non) test. @@ -560,7 +676,17 @@ NOTMUCH_NEW () notmuch_search_sanitize () { - sed -r -e 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/' + perl -pe 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/' +} + +notmuch_search_files_sanitize () +{ + notmuch_dir_sanitize +} + +notmuch_dir_sanitize () +{ + sed -e "s,$MAIL_DIR,MAIL_DIR," -e "s,${PWD},CWD,g" "$@" } NOTMUCH_SHOW_FILENAME_SQUELCH='s,filename:.*/mail,filename:/XXX/mail,' @@ -572,14 +698,46 @@ notmuch_show_sanitize_all () { sed \ -e 's| filename:.*| filename:XXXXX|' \ - -e 's| id:[^ ]* | id:XXXXX |' + -e 's| id:[^ ]* | id:XXXXX |' | \ + notmuch_date_sanitize } notmuch_json_show_sanitize () { sed \ -e 's|"id": "[^"]*",|"id": "XXXXX",|g' \ - -e 's|"filename": "[^"]*",|"filename": "YYYYY",|g' + -e 's|"Date": "Fri, 05 Jan 2001 [^"]*0000"|"Date": "GENERATED_DATE"|g' \ + -e 's|"filename": "signature.asc",||g' \ + -e 's|"filename": "/[^"]*",|"filename": "YYYYY",|g' \ + -e 's|"timestamp": 97.......|"timestamp": 42|g' +} + +notmuch_emacs_error_sanitize () +{ + local command=$1 + shift + for file in "$@"; do + echo "=== $file ===" + cat "$file" + done | sed \ + -e 's/^\[.*\]$/[XXX]/' \ + -e "s|^\(command: \)\{0,1\}/.*/$command|\1YYY/$command|" +} + +notmuch_date_sanitize () +{ + sed \ + -e 's/^Date: Fri, 05 Jan 2001 .*0000/Date: GENERATED_DATE/' +} + +notmuch_uuid_sanitize () +{ + sed 's/[0-9a-f]\{8\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{4\}-[0-9a-f]\{12\}/UUID/g' +} + +notmuch_built_with_sanitize () +{ + sed 's/^built_with[.]\(.*\)=.*$/built_with.\1=something/' } # End of notmuch helper functions @@ -609,18 +767,22 @@ test_have_prereq () { esac } +declare -A test_missing_external_prereq_ +declare -A test_subtest_missing_external_prereq_ + # declare prerequisite for the given external binary test_declare_external_prereq () { binary="$1" test "$#" = 2 && name=$2 || name="$binary(1)" - hash $binary 2>/dev/null || eval " - test_missing_external_prereq_${binary}_=t + if ! hash $binary 2>/dev/null; then + test_missing_external_prereq_["${binary}"]=t + eval " $binary () { - echo -n \"\$test_subtest_missing_external_prereqs_ \" | grep -qe \" $name \" || - test_subtest_missing_external_prereqs_=\"\$test_subtest_missing_external_prereqs_ $name\" + test_subtest_missing_external_prereq_[\"${name}\"]=t false }" + fi } # Explicitly require external prerequisite. Useful when binary is @@ -628,7 +790,7 @@ $binary () { # Returns success if dependency is available, failure otherwise. test_require_external_prereq () { binary="$1" - if [ "$(eval echo -n \$test_missing_external_prereq_${binary}_)" = t ]; then + if [[ ${test_missing_external_prereq_["${binary}"]} == t ]]; then # dependency is missing, call the replacement function to note it eval "$binary" else @@ -641,12 +803,15 @@ test_require_external_prereq () { test_ok_ () { if test "$test_subtest_known_broken_" = "t"; then - test_known_broken_ok_ "$@" + test_known_broken_ok_ return fi test_success=$(($test_success + 1)) + if test -n "$NOTMUCH_TEST_QUIET"; then + return 0 + fi say_color pass "%-6s" "PASS" - echo " $@" + echo " $test_subtest_name" } test_failure_ () { @@ -655,7 +820,8 @@ test_failure_ () { return fi test_failure=$(($test_failure + 1)) - test_failure_message_ "FAIL" "$@" + print_test_description + test_failure_message_ "FAIL" "$test_subtest_name" "$@" test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; } return 1 } @@ -672,13 +838,13 @@ test_known_broken_ok_ () { test_reset_state_ test_fixed=$(($test_fixed+1)) say_color pass "%-6s" "FIXED" - echo " $@" + echo " $test_subtest_name" } test_known_broken_failure_ () { test_reset_state_ test_broken=$(($test_broken+1)) - test_failure_message_ "BROKEN" "$@" + test_failure_message_ "BROKEN" "$test_subtest_name" "$@" return 1 } @@ -703,6 +869,12 @@ test_skip () { case $this_test.$test_count in $skp) to_skip=t + break + esac + case $this_test_bare.$test_count in + $skp) + to_skip=t + break esac done if test -z "$to_skip" && test -n "$prereq" && @@ -721,9 +893,9 @@ test_skip () { } test_check_missing_external_prereqs_ () { - if test -n "$test_subtest_missing_external_prereqs_"; then - say_color skip >&1 "missing prerequisites:" - echo "$test_subtest_missing_external_prereqs_" >&1 + if [[ ${#test_subtest_missing_external_prereq_[@]} != 0 ]]; then + say_color skip >&1 "missing prerequisites: " + echo ${!test_subtest_missing_external_prereq_[@]} >&1 test_report_skip_ "$@" else false @@ -746,6 +918,7 @@ test_expect_success () { test "$#" = 3 && { prereq=$1; shift; } || prereq= test "$#" = 2 || error "bug in the test script: not 2 or 3 parameters to test-expect-success" + test_subtest_name="$1" test_reset_state_ if ! test_skip "$@" then @@ -755,9 +928,9 @@ test_expect_success () { test_check_missing_external_prereqs_ "$@" || if [ "$run_ret" = 0 -a "$eval_ret" = 0 ] then - test_ok_ "$1" + test_ok_ else - test_failure_ "$@" + test_failure_ "$2" fi fi } @@ -766,6 +939,7 @@ test_expect_code () { test "$#" = 4 && { prereq=$1; shift; } || prereq= test "$#" = 3 || error "bug in the test script: not 3 or 4 parameters to test-expect-code" + test_subtest_name="$2" test_reset_state_ if ! test_skip "$@" then @@ -775,9 +949,9 @@ test_expect_code () { test_check_missing_external_prereqs_ "$@" || if [ "$run_ret" = 0 -a "$eval_ret" = "$1" ] then - test_ok_ "$2" + test_ok_ else - test_failure_ "$@" + test_failure_ "exit code $eval_ret, expected $1" "$3" fi fi } @@ -793,11 +967,11 @@ test_expect_code () { test_external () { test "$#" = 4 && { prereq=$1; shift; } || prereq= test "$#" = 3 || - error >&5 "bug in the test script: not 3 or 4 parameters to test_external" - descr="$1" + error >&6 "bug in the test script: not 3 or 4 parameters to test_external" + test_subtest_name="$1" shift test_reset_state_ - if ! test_skip "$descr" "$@" + if ! test_skip "$test_subtest_name" "$@" then # Announce the script to reduce confusion about the # test output that follows. @@ -808,9 +982,9 @@ test_external () { "$@" 2>&4 if [ "$?" = 0 ] then - test_ok_ "$descr" + test_ok_ else - test_failure_ "$descr" "$@" + test_failure_ "$@" fi fi } @@ -824,11 +998,11 @@ test_external_without_stderr () { stderr="$tmp/git-external-stderr.$$.tmp" test_external "$@" 4> "$stderr" [ -f "$stderr" ] || error "Internal error: $stderr disappeared." - descr="no stderr: $1" + test_subtest_name="no stderr: $1" shift if [ ! -s "$stderr" ]; then rm "$stderr" - test_ok_ "$descr" + test_ok_ else if [ "$verbose" = t ]; then output=`echo; echo Stderr is:; cat "$stderr"` @@ -837,7 +1011,7 @@ test_external_without_stderr () { fi # rm first in case test_failure exits. rm "$stderr" - test_failure_ "$descr" "$@" "$output" + test_failure_ "$@" "$output" fi } @@ -904,7 +1078,7 @@ test_done () { GIT_EXIT_OK=t test_results_dir="$TEST_DIRECTORY/test-results" mkdir -p "$test_results_dir" - test_results_path="$test_results_dir/${0%.sh}-$$" + test_results_path="$test_results_dir/$this_test" echo "total $test_count" >> $test_results_path echo "success $test_success" >> $test_results_path @@ -913,8 +1087,6 @@ test_done () { echo "failed $test_failure" >> $test_results_path echo "" >> $test_results_path - echo - [ -n "$EMACS_SERVER" ] && test_emacs '(kill-emacs)' if [ "$test_failure" = "0" ]; then @@ -938,15 +1110,14 @@ export NOTMUCH_CONFIG=$NOTMUCH_CONFIG # Here's what we are using here: # -# --no-init-file Don't load users ~/.emacs -# -# --no-site-file Don't load the site-wide startup stuff +# --quick Use minimal customization. This implies --no-init-file, +# --no-site-file and (emacs 24) --no-site-lisp # # --directory Ensure that the local elisp sources are found # # --load Force loading of notmuch.el and test-lib.el -exec ${TEST_EMACS} --no-init-file --no-site-file \ +exec ${TEST_EMACS} --quick \ --directory "$TEST_DIRECTORY/../emacs" --load notmuch.el \ --directory "$TEST_DIRECTORY" --load test-lib.el \ "\$@" @@ -959,11 +1130,11 @@ test_emacs () { missing_dependencies= test_require_external_prereq dtach || missing_dependencies=1 test_require_external_prereq emacs || missing_dependencies=1 - test_require_external_prereq emacsclient || missing_dependencies=1 + test_require_external_prereq ${TEST_EMACSCLIENT} || missing_dependencies=1 test -z "$missing_dependencies" || return if [ -z "$EMACS_SERVER" ]; then - emacs_tests="$(basename $0).el" + emacs_tests="${this_test_bare}.el" if [ -f "$TEST_DIRECTORY/$emacs_tests" ]; then load_emacs_tests="--eval '(load \"$emacs_tests\")'" else @@ -971,9 +1142,10 @@ test_emacs () { fi server_name="notmuch-test-suite-$$" # start a detached session with an emacs server - # user's TERM is given to dtach which assumes a minimally + # user's TERM (or 'vt100' in case user's TERM is unset, empty + # or 'dumb') is given to dtach which assumes a minimally # VT100-compatible terminal -- and emacs inherits that - TERM=$ORIGINAL_TERM dtach -n "$TEST_TMPDIR/emacs-dtach-socket.$$" \ + TERM=$DTACH_TERM dtach -n "$TEST_TMPDIR/emacs-dtach-socket.$$" \ sh -c "stty rows 24 cols 80; exec '$TMP_DIRECTORY/run_emacs' \ --no-window-system \ $load_emacs_tests \ @@ -995,23 +1167,35 @@ test_emacs () { rm -f OUTPUT touch OUTPUT - emacsclient --socket-name="$EMACS_SERVER" --eval "(progn $@)" + ${TEST_EMACSCLIENT} --socket-name="$EMACS_SERVER" --eval "(notmuch-test-progn $@)" } test_python() { export LD_LIBRARY_PATH=$TEST_DIRECTORY/../lib export PYTHONPATH=$TEST_DIRECTORY/../bindings/python - # Some distros (e.g. Arch Linux) ship Python 2.* as /usr/bin/python2, - # most others as /usr/bin/python. So first try python2, and fallback to - # python if python2 doesn't exist. - cmd=python2 - [[ "$test_missing_external_prereq_python2_" = t ]] && cmd=python - (echo "import sys; _orig_stdout=sys.stdout; sys.stdout=open('OUTPUT', 'w')"; cat) \ - | $cmd - + | $NOTMUCH_PYTHON - +} + +test_ruby() { + export LD_LIBRARY_PATH=$TEST_DIRECTORY/../lib + MAIL_DIR=$MAIL_DIR ruby -I $TEST_DIRECTORY/../bindings/ruby> OUTPUT } +test_C () { + exec_file="test${test_count}" + test_file="${exec_file}.c" + cat > ${test_file} + export LD_LIBRARY_PATH=${TEST_DIRECTORY}/../lib + ${TEST_CC} ${TEST_CFLAGS} -I${TEST_DIRECTORY}/../lib -o ${exec_file} ${test_file} -L${TEST_DIRECTORY}/../lib/ -lnotmuch -ltalloc + echo "== stdout ==" > OUTPUT.stdout + echo "== stderr ==" > OUTPUT.stderr + ./${exec_file} "$@" 1>>OUTPUT.stdout 2>>OUTPUT.stderr + notmuch_dir_sanitize OUTPUT.stdout OUTPUT.stderr > OUTPUT +} + + # Creates a script that counts how much time it is executed and calls # notmuch. $notmuch_counter_command is set to the path to the # generated script. Use notmuch_counter_value() function to get the @@ -1048,7 +1232,7 @@ test_reset_state_ () { test -z "$test_init_done_" && test_init_ test_subtest_known_broken_= - test_subtest_missing_external_prereqs_= + test_subtest_missing_external_prereq_=() } # called once before the first subtest @@ -1060,141 +1244,14 @@ test_init_ () { } -find_notmuch_path () -{ - dir="$1" - - while [ -n "$dir" ]; do - bin="$dir/notmuch" - if [ -x "$bin" ]; then - echo "$dir" - return - fi - dir="$(dirname "$dir")" - if [ "$dir" = "/" ]; then - break - fi - done -} - -# Test the binaries we have just built. The tests are kept in -# test/ subdirectory and are run in 'trash directory' subdirectory. -TEST_DIRECTORY=$(pwd) -notmuch_path=`find_notmuch_path "$TEST_DIRECTORY"` -if test -n "$valgrind" -then - make_symlink () { - test -h "$2" && - test "$1" = "$(readlink "$2")" || { - # be super paranoid - if mkdir "$2".lock - then - rm -f "$2" && - ln -s "$1" "$2" && - rm -r "$2".lock - else - while test -d "$2".lock - do - say "Waiting for lock on $2." - sleep 1 - done - fi - } - } - - make_valgrind_symlink () { - # handle only executables - test -x "$1" || return - - base=$(basename "$1") - symlink_target=$TEST_DIRECTORY/../$base - # do not override scripts - if test -x "$symlink_target" && - test ! -d "$symlink_target" && - test "#!" != "$(head -c 2 < "$symlink_target")" - then - symlink_target=$TEST_DIRECTORY/valgrind.sh - fi - case "$base" in - *.sh|*.perl) - symlink_target=$TEST_DIRECTORY/unprocessed-script - esac - # create the link, or replace it if it is out of date - make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit - } - - # override notmuch executable in TEST_DIRECTORY/.. - GIT_VALGRIND=$TEST_DIRECTORY/valgrind - mkdir -p "$GIT_VALGRIND"/bin - make_valgrind_symlink $TEST_DIRECTORY/../notmuch - OLDIFS=$IFS - IFS=: - for path in $PATH - do - ls "$path"/notmuch 2> /dev/null | - while read file - do - make_valgrind_symlink "$file" - done - done - IFS=$OLDIFS - PATH=$GIT_VALGRIND/bin:$PATH - GIT_EXEC_PATH=$GIT_VALGRIND/bin - export GIT_VALGRIND - test -n "$notmuch_path" && MANPATH="$notmuch_path/man:$MANPATH" -else # normal case - if test -n "$notmuch_path" - then - PATH="$notmuch_path:$PATH" - MANPATH="$notmuch_path/man:$MANPATH" - fi -fi -export PATH MANPATH - -# Test repository -test="tmp.$(basename "$0" .sh)" -test -n "$root" && test="$root/$test" -case "$test" in -/*) TMP_DIRECTORY="$test" ;; - *) TMP_DIRECTORY="$TEST_DIRECTORY/$test" ;; -esac -test ! -z "$debug" || remove_tmp=$TMP_DIRECTORY -rm -fr "$test" || { - GIT_EXIT_OK=t - echo >&5 "FATAL: Cannot prepare test area" - exit 1 -} - -# A temporary home directory is needed by at least: -# - emacs/"Sending a message via (fake) SMTP" -# - emacs/"Reply within emacs" -# - crypto/emacs_deliver_message -export HOME="${TMP_DIRECTORY}/home" -mkdir -p "${HOME}" - -MAIL_DIR="${TMP_DIRECTORY}/mail" -export GNUPGHOME="${TMP_DIRECTORY}/gnupg" -export NOTMUCH_CONFIG="${TMP_DIRECTORY}/notmuch-config" - -mkdir -p "${test}" -mkdir -p "${MAIL_DIR}" - -cat <"${NOTMUCH_CONFIG}" -[database] -path=${MAIL_DIR} - -[user] -name=Notmuch Test Suite -primary_email=test_suite@notmuchmail.org -other_email=test_suite_other@notmuchmail.org;test_suite@otherdomain.org -EOF +. ./test-lib-common.sh || exit 1 emacs_generate_script # Use -P to resolve symlinks in our working directory so that the cwd # in subprocesses like git equals our $PWD (for pathname comparisons). -cd -P "$test" || error "Cannot setup test environment" +cd -P "$test" || error "Cannot set up test environment" if test "$verbose" = "t" then @@ -1203,7 +1260,6 @@ else exec 4>test.output 3>&4 fi -this_test=${0##*/} for skp in $NOTMUCH_SKIP_TESTS do to_skip= @@ -1212,6 +1268,12 @@ do case "$this_test" in $skp) to_skip=t + break + esac + case "$this_test_bare" in + $skp) + to_skip=t + break esac done case "$to_skip" in @@ -1272,11 +1334,23 @@ test -z "$NO_PYTHON" && test_set_prereq PYTHON ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS rm -f y +# convert variable from configure to more convenient form +case "$NOTMUCH_DEFAULT_XAPIAN_BACKEND" in + glass) + db_ending=glass + ;; + chert) + db_ending=DB + ;; + *) + error "Unknown Xapian backend $NOTMUCH_DEFAULT_XAPIAN_BACKEND" +esac # declare prerequisites for external binaries used in tests test_declare_external_prereq dtach test_declare_external_prereq emacs -test_declare_external_prereq emacsclient +test_declare_external_prereq ${TEST_EMACSCLIENT} test_declare_external_prereq gdb test_declare_external_prereq gpg -test_declare_external_prereq python -test_declare_external_prereq python2 +test_declare_external_prereq openssl +test_declare_external_prereq gpgsm +test_declare_external_prereq ${NOTMUCH_PYTHON}