From: Mikhail Gusarov Date: Thu, 22 Oct 2009 04:07:43 +0000 (-0700) Subject: Add sha1.c and libsha1.h for doing SHA-1-based message-ID generation. X-Git-Tag: 0.1~779 X-Git-Url: https://git.notmuchmail.org/git?p=notmuch;a=commitdiff_plain;h=96c0d1c1cb020654fd582509b25d979f2752500f Add sha1.c and libsha1.h for doing SHA-1-based message-ID generation. This code comes courtesy of Brian Gladman and Mikhail Gusarov. Both files are available under the GPL and were downloaded as version 0.2 of libsha1 from git://github.com/dottedmag/libsha1.git with the following commit: commit d0f0e7e0dc5ce2d58972cb5a492183c0d4e58433 Author: Mikhail Gusarov Date: Mon Oct 20 22:38:47 2008 +0700 Version bump. Signed-off-by: Mikhail Gusarov --- diff --git a/libsha1.h b/libsha1.h new file mode 100644 index 00000000..b4dca93b --- /dev/null +++ b/libsha1.h @@ -0,0 +1,67 @@ +/* + --------------------------------------------------------------------------- + Copyright (c) 2002, Dr Brian Gladman, Worcester, UK. All rights reserved. + + LICENSE TERMS + + The free distribution and use of this software in both source and binary + form is allowed (with or without changes) provided that: + + 1. distributions of this source code include the above copyright + notice, this list of conditions and the following disclaimer; + + 2. distributions in binary form include the above copyright + notice, this list of conditions and the following disclaimer + in the documentation and/or other associated materials; + + 3. the copyright holder's name is not used to endorse products + built using this software without specific written permission. + + ALTERNATIVELY, provided that this notice is retained in full, this product + may be distributed under the terms of the GNU General Public License (GPL), + in which case the provisions of the GPL apply INSTEAD OF those given above. + + DISCLAIMER + + This software is provided 'as is' with no explicit or implied warranties + in respect of its properties, including, but not limited to, correctness + and/or fitness for purpose. + --------------------------------------------------------------------------- + Issue Date: 01/08/2005 +*/ + +#ifndef _SHA1_H +#define _SHA1_H + +#if defined(__cplusplus) +extern "C" +{ +#endif +#if 0 +} /* Appleasing Emacs */ +#endif + +#include + +/* Size of SHA1 digest */ + +#define SHA1_DIGEST_SIZE 20 + +/* type to hold the SHA1 context */ + +typedef struct +{ uint32_t count[2]; + uint32_t hash[5]; + uint32_t wbuf[16]; +} sha1_ctx; + +void sha1_begin(sha1_ctx ctx[1]); +void sha1_hash(const unsigned char data[], unsigned long len, sha1_ctx ctx[1]); +void sha1_end(unsigned char hval[], sha1_ctx ctx[1]); +void sha1(unsigned char hval[], const unsigned char data[], unsigned long len); + +#if defined(__cplusplus) +} +#endif + +#endif diff --git a/sha1.c b/sha1.c new file mode 100644 index 00000000..c39a5a17 --- /dev/null +++ b/sha1.c @@ -0,0 +1,242 @@ +/* + --------------------------------------------------------------------------- + Copyright (c) 2002, Dr Brian Gladman, Worcester, UK. All rights reserved. + + LICENSE TERMS + + The free distribution and use of this software in both source and binary + form is allowed (with or without changes) provided that: + + 1. distributions of this source code include the above copyright + notice, this list of conditions and the following disclaimer; + + 2. distributions in binary form include the above copyright + notice, this list of conditions and the following disclaimer + in the documentation and/or other associated materials; + + 3. the copyright holder's name is not used to endorse products + built using this software without specific written permission. + + ALTERNATIVELY, provided that this notice is retained in full, this product + may be distributed under the terms of the GNU General Public License (GPL), + in which case the provisions of the GPL apply INSTEAD OF those given above. + + DISCLAIMER + + This software is provided 'as is' with no explicit or implied warranties + in respect of its properties, including, but not limited to, correctness + and/or fitness for purpose. + --------------------------------------------------------------------------- + Issue Date: 01/08/2005 + + This is a byte oriented version of SHA1 that operates on arrays of bytes + stored in memory. +*/ + +#include /* for memcpy() etc. */ + +#include "libsha1.h" + +#if defined(__cplusplus) +extern "C" +{ +#endif + +#define SHA1_BLOCK_SIZE 64 + +#define rotl32(x,n) (((x) << n) | ((x) >> (32 - n))) +#define rotr32(x,n) (((x) >> n) | ((x) << (32 - n))) + +#define bswap_32(x) ((rotr32((x), 24) & 0x00ff00ff) | (rotr32((x), 8) & 0xff00ff00)) + +#if (PLATFORM_BYTE_ORDER == IS_LITTLE_ENDIAN) +#define bsw_32(p,n) \ + { int _i = (n); while(_i--) ((uint32_t*)p)[_i] = bswap_32(((uint32_t*)p)[_i]); } +#else +#define bsw_32(p,n) +#endif + +#define SHA1_MASK (SHA1_BLOCK_SIZE - 1) + +#if 0 + +#define ch(x,y,z) (((x) & (y)) ^ (~(x) & (z))) +#define parity(x,y,z) ((x) ^ (y) ^ (z)) +#define maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) + +#else /* Discovered by Rich Schroeppel and Colin Plumb */ + +#define ch(x,y,z) ((z) ^ ((x) & ((y) ^ (z)))) +#define parity(x,y,z) ((x) ^ (y) ^ (z)) +#define maj(x,y,z) (((x) & (y)) | ((z) & ((x) ^ (y)))) + +#endif + +/* Compile 64 bytes of hash data into SHA1 context. Note */ +/* that this routine assumes that the byte order in the */ +/* ctx->wbuf[] at this point is in such an order that low */ +/* address bytes in the ORIGINAL byte stream will go in */ +/* this buffer to the high end of 32-bit words on BOTH big */ +/* and little endian systems */ + +#ifdef ARRAY +#define q(v,n) v[n] +#else +#define q(v,n) v##n +#endif + +#define one_cycle(v,a,b,c,d,e,f,k,h) \ + q(v,e) += rotr32(q(v,a),27) + \ + f(q(v,b),q(v,c),q(v,d)) + k + h; \ + q(v,b) = rotr32(q(v,b), 2) + +#define five_cycle(v,f,k,i) \ + one_cycle(v, 0,1,2,3,4, f,k,hf(i )); \ + one_cycle(v, 4,0,1,2,3, f,k,hf(i+1)); \ + one_cycle(v, 3,4,0,1,2, f,k,hf(i+2)); \ + one_cycle(v, 2,3,4,0,1, f,k,hf(i+3)); \ + one_cycle(v, 1,2,3,4,0, f,k,hf(i+4)) + +static void sha1_compile(sha1_ctx ctx[1]) +{ uint32_t *w = ctx->wbuf; + +#ifdef ARRAY + uint32_t v[5]; + memcpy(v, ctx->hash, 5 * sizeof(uint32_t)); +#else + uint32_t v0, v1, v2, v3, v4; + v0 = ctx->hash[0]; v1 = ctx->hash[1]; + v2 = ctx->hash[2]; v3 = ctx->hash[3]; + v4 = ctx->hash[4]; +#endif + +#define hf(i) w[i] + + five_cycle(v, ch, 0x5a827999, 0); + five_cycle(v, ch, 0x5a827999, 5); + five_cycle(v, ch, 0x5a827999, 10); + one_cycle(v,0,1,2,3,4, ch, 0x5a827999, hf(15)); \ + +#undef hf +#define hf(i) (w[(i) & 15] = rotl32( \ + w[((i) + 13) & 15] ^ w[((i) + 8) & 15] \ + ^ w[((i) + 2) & 15] ^ w[(i) & 15], 1)) + + one_cycle(v,4,0,1,2,3, ch, 0x5a827999, hf(16)); + one_cycle(v,3,4,0,1,2, ch, 0x5a827999, hf(17)); + one_cycle(v,2,3,4,0,1, ch, 0x5a827999, hf(18)); + one_cycle(v,1,2,3,4,0, ch, 0x5a827999, hf(19)); + + five_cycle(v, parity, 0x6ed9eba1, 20); + five_cycle(v, parity, 0x6ed9eba1, 25); + five_cycle(v, parity, 0x6ed9eba1, 30); + five_cycle(v, parity, 0x6ed9eba1, 35); + + five_cycle(v, maj, 0x8f1bbcdc, 40); + five_cycle(v, maj, 0x8f1bbcdc, 45); + five_cycle(v, maj, 0x8f1bbcdc, 50); + five_cycle(v, maj, 0x8f1bbcdc, 55); + + five_cycle(v, parity, 0xca62c1d6, 60); + five_cycle(v, parity, 0xca62c1d6, 65); + five_cycle(v, parity, 0xca62c1d6, 70); + five_cycle(v, parity, 0xca62c1d6, 75); + +#ifdef ARRAY + ctx->hash[0] += v[0]; ctx->hash[1] += v[1]; + ctx->hash[2] += v[2]; ctx->hash[3] += v[3]; + ctx->hash[4] += v[4]; +#else + ctx->hash[0] += v0; ctx->hash[1] += v1; + ctx->hash[2] += v2; ctx->hash[3] += v3; + ctx->hash[4] += v4; +#endif +} + +void sha1_begin(sha1_ctx ctx[1]) +{ + ctx->count[0] = ctx->count[1] = 0; + ctx->hash[0] = 0x67452301; + ctx->hash[1] = 0xefcdab89; + ctx->hash[2] = 0x98badcfe; + ctx->hash[3] = 0x10325476; + ctx->hash[4] = 0xc3d2e1f0; +} + +/* SHA1 hash data in an array of bytes into hash buffer and */ +/* call the hash_compile function as required. */ + +void sha1_hash(const unsigned char data[], unsigned long len, sha1_ctx ctx[1]) +{ uint32_t pos = (uint32_t)(ctx->count[0] & SHA1_MASK), + space = SHA1_BLOCK_SIZE - pos; + const unsigned char *sp = data; + + if((ctx->count[0] += len) < len) + ++(ctx->count[1]); + + while(len >= space) /* tranfer whole blocks if possible */ + { + memcpy(((unsigned char*)ctx->wbuf) + pos, sp, space); + sp += space; len -= space; space = SHA1_BLOCK_SIZE; pos = 0; + bsw_32(ctx->wbuf, SHA1_BLOCK_SIZE >> 2); + sha1_compile(ctx); + } + + memcpy(((unsigned char*)ctx->wbuf) + pos, sp, len); +} + +/* SHA1 final padding and digest calculation */ + +void sha1_end(unsigned char hval[], sha1_ctx ctx[1]) +{ uint32_t i = (uint32_t)(ctx->count[0] & SHA1_MASK); + + /* put bytes in the buffer in an order in which references to */ + /* 32-bit words will put bytes with lower addresses into the */ + /* top of 32 bit words on BOTH big and little endian machines */ + bsw_32(ctx->wbuf, (i + 3) >> 2); + + /* we now need to mask valid bytes and add the padding which is */ + /* a single 1 bit and as many zero bits as necessary. Note that */ + /* we can always add the first padding byte here because the */ + /* buffer always has at least one empty slot */ + ctx->wbuf[i >> 2] &= 0xffffff80 << 8 * (~i & 3); + ctx->wbuf[i >> 2] |= 0x00000080 << 8 * (~i & 3); + + /* we need 9 or more empty positions, one for the padding byte */ + /* (above) and eight for the length count. If there is not */ + /* enough space, pad and empty the buffer */ + if(i > SHA1_BLOCK_SIZE - 9) + { + if(i < 60) ctx->wbuf[15] = 0; + sha1_compile(ctx); + i = 0; + } + else /* compute a word index for the empty buffer positions */ + i = (i >> 2) + 1; + + while(i < 14) /* and zero pad all but last two positions */ + ctx->wbuf[i++] = 0; + + /* the following 32-bit length fields are assembled in the */ + /* wrong byte order on little endian machines but this is */ + /* corrected later since they are only ever used as 32-bit */ + /* word values. */ + ctx->wbuf[14] = (ctx->count[1] << 3) | (ctx->count[0] >> 29); + ctx->wbuf[15] = ctx->count[0] << 3; + sha1_compile(ctx); + + /* extract the hash value as bytes in case the hash buffer is */ + /* misaligned for 32-bit words */ + for(i = 0; i < SHA1_DIGEST_SIZE; ++i) + hval[i] = (unsigned char)(ctx->hash[i >> 2] >> (8 * (~i & 3))); +} + +void sha1(unsigned char hval[], const unsigned char data[], unsigned long len) +{ sha1_ctx cx[1]; + + sha1_begin(cx); sha1_hash(data, len, cx); sha1_end(hval, cx); +} + +#if defined(__cplusplus) +} +#endif