debian: Add appropriate substitution variables to debian/control
Without this change, dh_gencontrol emits:
dpkg-gencontrol: warning: package python-notmuch: substitution variable ${python:Provides} unused, but is defined
dpkg-gencontrol: warning: package python-notmuch: substitution variable ${python:Versions} unused, but is defined
dpkg-gencontrol: warning: package notmuch-mutt: substitution variable ${perl:Depends} unused, but is defined
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Debian's build hardening toolchain options produce binary artifacts
that are more resistant to compromise. The most visible change for
notmuch today is likely to be the addition of the "bindnow" linker
flag, which contributes to making the "Global Offset Table" fully
read-only.
See https://wiki.debian.org/Hardening for more details.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Tomi Ollila [Mon, 10 Jun 2019 18:39:23 +0000 (21:39 +0300)]
test: aggregate-results.sh: consistent style. zero forks.
- all variables in $((...)) without leading $
- all comparisons use -gt, -eq or -ne
- no -a nor -o inside [ ... ] expressions
- all indentation levels using one tab
Dropped unnecessary empty string check when reading results files.
Replaced pluralize() which was executed in subshell with
pluralize_s(). pluralize_s sets $s to 's' or '' based on value of
$1. Calls to pluralize_s are done in context of current shell, so
no forks to subshells executed.
test: signature verification during decryption (session keys)
When the user knows the signer's key, we want "notmuch show" to be
able to verify the signature of an encrypted and signed message
regardless of whether we are using a stashed session key or not.
I wrote this test because I was surprised to see signature
verification failing when viewing some encrypted messages after
upgrading to GPGME 1.13.0-1 in debian experimental.
The added tests here all pass with GPGME 1.12.0, but the final test
fails with 1.13.0, due to some buggy updates to GPGME upstream: see
https://dev.gnupg.org/T3464 for more details.
While the bug needs to be fixed in GPGME, notmuch's test suite needs
to make sure that GMime is doing what we expect it to do; i was a bit
surprised that it hadn't caught the problem, hence this patch.
I've fixed this bug in debian experimental with gpgme 1.13.0-2, so the
tests should pass on any debian system. I've also fixed it in the
gpgme packages (1.13.0-2~ppa1) in the ubuntu xenial PPA
(ppa:notmuch/notmuch) that notmuch uses for Travis CI.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
David Bremner [Fri, 7 Jun 2019 10:06:22 +0000 (07:06 -0300)]
debian: fix desktop install
Previous version expected full upstream install to be run, and also
caused lintian whine about the the desktop file being in a different
package than the script. I'm not sure they shouldn't both be in
elpa-notmuch, but I can see how they should be together.
David Bremner [Sat, 1 Jun 2019 02:24:52 +0000 (23:24 -0300)]
doc: use separate doctrees for distinct builders
It seems our previous attempt with order-only targets was not
sufficient to avoid problems with sphinx-builds doctree cache [0].
Looking around at other people's approaches [1], using separate
doctrees was suggested. I guess there might be a slight loss of
efficiency, but it seems more robust.
[0]: build failures were first noticed in Debian experimental, but I was able to duplicate it in
my usual build environment about 1 in 8 builds.
Part 0 of a multipart/encrypted object is
GMIME_MULTIPART_ENCRYPTED_VERSION; part 1 is
GMIME_MULTIPART_ENCRYPTED_CONTENT. Using the name for what we want
describes our intent more clearly than using a magic number in the
code.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
cli/reply: pull proposed subject line from the message, not the index
Protected subject lines were being emitted in reply when the cleartext
of documents was indexed. create_reply_message() was pulling the
subject line from the index, rather than pulling it from the
GMimeMessage object that it already has on hand.
This one-line fix to notmuch-reply.c solves that problem, and doesn't
cause any additional tests to fail.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
test: reply (in cli and emacs) should protect indexed sensitive headers
These tests are currently broken! When a protected subject is indexed
in the clear, it leaks in the reply headers :(
For emacs, we set up separate tests for when the protected header is
indexed in the clear and when it is unindexed. neither case should
leak, but the former wasn't tested yet.
We will fix the two broken tests in a subsequent patch.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
test: after reindexing, only legitimate protected subjects are searchable
This test scans for all the possible protected headers (including
bogus/broken ones) that are present in the protected-headers corpus,
trying to make sure that only the ones that are not broken or
malformed show up in a search after re-indexing.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
test: protected headers should work when both encrypted and signed.
Up to this point, we've tested protected headers on messages that have
either been encrypted or signed, but not both.
This adds a couple tests of signed+encrypted messages, one where the
subject line is masked (outside subject line is "Subject Unavailable")
and another where it is not (outside Subject: matches inner Subject:)
See the discussion at
https://dkg.fifthhorseman.net/blog/e-mail-cryptography.html#protected-headers
for more details about the nuances between signed, stripped, and
stubbed headers.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
indexing: record protected subject when indexing cleartext
When indexing the cleartext of an encrypted message, record any
protected subject in the database, which should make it findable and
visible in search.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
cli/reply: ensure encrypted Subject: line does not leak in the clear
Now that we can decrypt headers, we want to make sure that clients
using "notmuch reply" to prepare a reply don't leak cleartext in their
subject lines. In particular, the ["reply-headers"]["Subject"] should
by default show the external Subject.
A replying MUA that intends to protect the Subject line should show
the user the Subject from ["original"]["headers"]["Subject"] instead
of using ["reply-headers"]["Subject"].
This minor asymmetry with "notmuch show" is intentional. While both
tools always render the cleartext subject line when they know it (in
["headers"]["Subject"] for "notmuch show" and in
["original"]["headers"]["Subject"] for "notmuch reply"), "notmuch
reply" should never leak something that should stay under encrypted
cover in "reply-headers".
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
cli/show: add information about which headers were protected
The header-mask member of the per-message crypto object allows a
clever UI frontend to mark whether a header was protected (or not).
And if it was protected, it contains enough information to show useful
detail to an interested user. For example, an MUA could offer a "show
what this message's Subject looked like on the wire" feature in expert
mode.
As before, we only handle Subject for now, but we might be able to
handle other headers in the future.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Amended by db: tweaked schemata notation.
Here we add several variant e-mail messages, some of which have
correctly-structured protected headers, and some of which do not. The
goal of the tests is to ensure that the right protected subjects get
reported.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
util/crypto: add information about the payload part
When walking the MIME tree, if we discover that we are at the
cryptographic payload, then we would like to record at least the
Subject header of the current MIME part.
In the future, we might want to record many other headers as well, but
for now we will stick with just the Subject.
See
https://dkg.fifthhorseman.net/blog/e-mail-cryptography.html#cryptographic-envelope
for more description of the Cryptographic Payload vs. the
Cryptographic Envelope.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
This paves the way for emitting protected headers after verification
and decryption, because it means that the headers will only be emitted
after the body has been parsed.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
In certain cases of test suite failure, the summary report was not
being printed. In particular, any failure on the parallel test suite,
and any aborted test in the serialized test suite would end up hiding
the summary.
It's better to always show the summary where we can (while preserving
the return code). If we do abort due to this high-level failure,
though, we should also announce to the user that we're doing so as
close to the end of the process as possible, to make it easier to find
the problem.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
cli/show: emit new whole-message crypto status output
This allows MUAs that don't want to think about per-mime-part
cryptographic status to have a simple high-level overview of the
message's cryptographic state.
Sensibly structured encrypted and/or signed messages will work fine
with this. The only requirement for the simplest encryption + signing
is that the message have all of its encryption and signing protection
(the "cryptographic envelope") in a contiguous set of MIME layers at
the very outside of the message itself.
This is because messages with some subparts signed or encrypted, but
with other subparts with no cryptographic protection is very difficult
to reason about, and even harder for the user to make sense of or work
with.
For further characterization of the Cryptographic Envelope and some of
the usability tradeoffs, see here:
mime-node: track whole-message crypto state while walking the tree
Deliberately populate the message's cryptographic status while walking
the MIME tree from the CLI.
Note that the additional numchild argument added to _mime_node_create
is a passthrough needed to be able to adequately populate the crypto
state object.
cli: expose message-wide crypto status from mime-node
The mime node context (a per-message context) gains a cryptographic
status object, and the mime_node_t object itself can return a view on
that status to an interested party.
The status is not yet populated, and for now we can keep that view
read-only, so that it can only be populated/modified during MIME tree
traversal.
util/crypto: _notmuch_message_crypto: tracks message-wide crypto state
E-mail encryption and signatures reported by notmuch are at the MIME
part level. This makes sense in the dirty details, but for users we
need to have a per-message conception of the cryptographic state of
the e-mail. (see
https://dkg.fifthhorseman.net/blog/e-mail-cryptography.html for more
discussion of why this is important).
The object created in this patch is a useful for tracking the
cryptographic state of the underlying message as a whole, based on a
depth-first search of the message's MIME structure.
This object stores a signature list of the message, but we don't
handle it yet. Further patches in this series will make use of the
signature list.
emacs: Drop content-free "Unknown signature status" button
When we have not been able to evaluate the signature status of a given
MIME part, showing a content-free (and interaction-free) "[ Unknown
signature status ]" button doesn't really help the user at all, and
takes up valuable screen real-estate.
A visual reminder that a given message is *not* signed isn't helpful
unless it is always present, in which case we'd want to see "[ Unknown
signature status ]" buttons on all messages, even ones that don't have
a signing structure, but i don't think we want that.
Amended by db to drop the unused initialization of 'label'
David Bremner [Tue, 26 Feb 2019 01:57:40 +0000 (21:57 -0400)]
lib: support user prefix names in term generation
This should not change the indexing process yet as nothing calls
_notmuch_message_gen_terms with a user prefix name. On the other hand,
it should not break anything either.
_notmuch_database_prefix does a linear walk of the list of (built-in)
prefixes, followed by a logarithmic time search of the list of user
prefixes. The latter is probably not really noticable.
David Bremner [Sat, 17 Nov 2018 14:09:00 +0000 (10:09 -0400)]
lib: cache user prefixes in database object
This will be used to avoid needing a database access to resolve a db
prefix from the corresponding UI prefix (e.g. when indexing). Arguably
the setup of the separate header map does not belong here, since it is
about indexing rather than querying, but we currently don't have any
other indexing setup to do.
David Bremner [Wed, 27 Mar 2019 10:13:31 +0000 (07:13 -0300)]
cli/config: check syntax of user configured field names
These restrictions are meant to prevent incompatibilities with the
Xapian query parser (which will split at non-word characters) and
clashes with future notmuch builtin fields.
David Bremner [Sat, 17 Nov 2018 14:08:58 +0000 (10:08 -0400)]
cli/config: support user header index config
We don't do anything with this configuration information information
yet, but nonetheless add a couple of regression tests to make sure we
don't break standard functionality when we do use the configuration
information.
David Bremner [Sat, 17 Nov 2018 14:08:57 +0000 (10:08 -0400)]
cli/config: refactor _stored_in_db
This will make it easier to add other prefixes that are stored in the
database, compared to special casing each one as "query." was. This
commit also adds the ability to validate keys with a given
prefix. This ability will be used in a future commit.
David Bremner [Tue, 26 Mar 2019 02:07:24 +0000 (23:07 -0300)]
util: add unicode_word_utf8
This originally use Xapian::Unicode::is_wordchar, but that forces
clients to link directly to libxapian, which seems like it might be
busywork if nothing else.
Leo Vivier [Mon, 20 May 2019 12:21:13 +0000 (14:21 +0200)]
emacs: make notmuch-search-interactive-region obsolete
`notmuch-search-interactive-region' was moved to notmuch-lib.el in f3cba19f882471a396a6b6175a709ccd1f6f34a0 and renamed to
`notmuch-interactive-region' without making the old function
obsolete, thereby breaking user-commands which made use of it.
This commit marks the function as obsolete and makes it an alias for
the new function.
David Bremner [Tue, 16 Apr 2019 01:46:16 +0000 (22:46 -0300)]
n_m_remove_indexed_terms: reduce number of Xapian API calls.
Previously this functioned scanned every term attached to a given
Xapian document. It turns out we know how to read only the terms we
need to preserve (and we might have already done so). This commit
replaces many calls to Xapian::Document::remove_term with one call to
::clear_terms, and a (typically much smaller) number of calls to
::add_term. Roughly speaking this is based on the assumption that most
messages have more text than they have tags.
According to the performance test suite, this yields a roughly 40%
speedup on "notmuch reindex '*'"
Tomi Ollila [Thu, 16 May 2019 20:43:51 +0000 (23:43 +0300)]
test-lib.sh: "tidied" emacs_deliver_message ()
Added initialization and checking of smtp_dummy_port
like it was done with smtp_dummy_pid.
Made those function-local variables.
One 8 spaces to tab consistency conversion.
And last, but definitely not least; while doing above
noticed that there were quite a few double-quoted strings
where $@ was in the middle of it -- replaced those with $*
for robustness ("...$@..." expands params to separate words,
"...$*..." params expands to single word).
configure: make _check_session_keys work with an as-needed linker
When using a promiscuous linker, _check_session_keys was working fine.
But some OSes (including some versions of Ubuntu) have set their
linker to always link in "--as-needed" mode, which means that the
order of the objects linked is relevant. If a library is loaded
before it is needed, that library will no longer be linked in the
final outcome. _check_session_keys.c was failing on those systems.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
We never want ./configure to try to do something with an unassigned
variable. So, make the directory $TEMP_GPG at the start of the
testing of session-key handling, and clean it up afterwards as long as
the directory exists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
David Bremner [Sun, 12 May 2019 02:45:59 +0000 (20:45 -0600)]
test/emacs: revert invalid-from test to pre-86f89385 behaviour
To the best of my understanding, this original behaviour was what
Carl's homebrew parser produced. With commit 86f89385 Austin switched
to using GMime (2.6). This produced arguably worse results, but since
the input was bad, we could live with it. Now with GMime 3.0 we are
getting the original results again, and there is no reason to consider
this test broken.
configure: Ensure that GMime can extract session keys
GMime 3.0 and higher can extract session keys, but it will *not*
extract session keys if it was built with --disable-crypto, or if it
was built against GPGME version < 1.8.0.
Notmuch currently expects to be able to extract session keys, and
tests will fail if it is not possible, so we ensure that this is the
case during ./configure time.
Part of this feels awkward because notmuch doesn't directly depend on
gpg at all. Rather, it depends on GMime, and the current
implementation of GMime depends on GPGME for its crypto, and GPGME in
turn depends on gpg.
So the use of gpg in ./configure isn't actually introducing a new
dependency, though if a future version of GMime were ever to move away
from GnuPG, we might need to reconsider.
Note that this changeset depends on
id:20190506174327.13457-1-dkg@fifthhorseman.net , which supplies the
rfc822 message test/corpora/crypto/basic-encrypted.eml used in it.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
tests: fail and report when a parallel build fails (or times out)
When a parallel build fails (or when it times out, if timeout is
present), the test suite should not blithely succeed. Catch these
failures and at least report them.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
tests: make timeout configurable with NOTMUCH_TEST_TIMEOUT (default: 2m)
The current 2 minute timeout is reasonable, but to exercise the test
suite or induce timeout failures, we might want to make it shorter.
This makes it configurable so you can run (for example):
make check NOTMUCH_TEST_TIMEOUT=10s
We stick with the default of 2m.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
test: avoid unnecessary extraction of the test fingerprint
FINGERPRINT is already exported by add_gnupg_home, so this is
unnecessary. This change also happens to get rid of the superfluous
check-trustdb spew from the test suite that looked like this:
emacs: test notmuch-show during message decryption
We did not have a test showing what message decryption looks like
within notmuch-emacs. This change gives us a baseline for future work
on the notmuch-emacs interface.
This differs from previous revisions of this patch in that it should
be insensitive to the order in which the local filesystem readdir()s
the underlying maildir.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
If either the moreutils or GNU parallel utility are available, run all
tests in parallel. On my eight core machine this makes for a ~x7
speed-up in the full test suite (1m24s -> 12s).
The design of the test suite makes this parallelization trivial.
tests: remove entangling corpus index optimization
The add_email_corpus test utility includes logic that tries to re-use
an index of the corpus if available. This was seemingly done as an
optimization, so that every test that uses the corpus didn't have to
create it's own index of the corpus. However, this has the perverse
side effect of entangling tests together, and breaks parallelization.
Forcing each test to do it's own index does increase the overall time
of the test slightly (~6%), but this will be more than made up for in
the next patch that introduces paraellization.
test/crypto: add_gnupg_home should have ultimate trust on "its own" key
The typical use case for gpg is that if you control a secret key, you
mark it with "ultimate" ownertrust.
The opaque --import-ownertrust mechanism is GnuPG's standard mechanism
to set up ultimate ownertrust (the ":6:" means "ultimate", for
whatever reason).
We adjust the test suite to match this change, inverting the sense of
one test: since the default is now that the user ID of the suite's own
key is valid, we change the test to make sure that the user ID is not
emitted when it is *not* valid.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
The user ID on the self-test is a little bit clunky-looking. It also
may end up showing up elsewhere in the test suite. Centralizing the
user ID in one place should make it easier to handle if it ever
changes, and should make tests easier to read.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
test/crypto: clarify the difference between ownertrust and validity
This is a subtle difference, but the output of notmuch shouldn't ever
change based on ownertrust itself -- notmuch is intended to show valid
User IDs, and to avoid showing invalid User IDs.
It so happens that setting ownertrust of a key to ultimate sets all
associated user IDs to "full" validity, so the test is correct, but
just misnamed.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
Apparently, message-default-charset is deprecated, which causes the
following warning messages during the build:
In notmuch-maildir-setup-message-for-saving:
emacs/notmuch-maildir-fcc.el:172:31:Warning: ‘message-default-charset’ is an
obsolete variable (as of 26.1); The default charset comes from the
language environment
In discussion with emacs upstream over on
https://debbugs.gnu.org/35370, it appears that we can just drop this
entirely and things should still work with emacs 25.
https://launchpad.net/~notmuch/+archive/ubuntu/notmuch/+packages
contains backports of gmime and gpgme and related cryptographic tools
to ubuntu xenial.
I tried to do a simple backport of gmime alone, and it failed due to
the older gpgme in xenial, so this setup resolves those problems.
This should allow us to continue to use the Travis continuous
integration build.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
David Bremner [Sat, 4 May 2019 22:29:08 +0000 (19:29 -0300)]
cli/show: avoid empty write to stdout in format_part_raw
Previously if the input was exactly a multiple of the internal buffer
size, notmuch would attempt to fwrite nothing to stdout, but still
expected fwrite to return 1, causing a failure that looked like this:
$ notmuch show --format=raw id:87o96f1cya.fsf@codeaurora.org
...entire message shown as expected..
Error: Write failed
$ echo $?
1
To fix the problem don't call fwrite at all when there's nothing to
write.
Amended by db: add some tests of message sizes likely to cause this
problem.
David Bremner [Sun, 24 Mar 2019 03:32:44 +0000 (00:32 -0300)]
cli/notmuch-show: support gzipped files
This drops "file" from mime_node_context and just uses a local
variable. It also uses the new gzip aware utility routines recently
added to util/gmime-extra.c. The use of gzopen / gzfile in addition is
a bit icky, but the choice is between that, and providing yet another
readline implimentation that understands GMime streams.
David Bremner [Sun, 24 Mar 2019 03:32:43 +0000 (00:32 -0300)]
lib/message_file: open gzipped files
Rather than storing the lower level stdio FILE object, we store a
GMime stream. This allows both transparent decompression, and passing
the stream into GMime for parsing. As a side effect, we can let GMime
close the underlying OS stream (indeed, that stream isn't visible here
anymore).
This change is enough to get notmuch-{new,search} working, but there is still
some work required for notmuch-show, to be done in a following commit.
gmime-cleanup: pass NULL as default GMimeParserOptions
This is a functional change, not a straight translation, because we
are no longer directly invoking g_mime_parser_options_get_default(),
but the GMime source has indicated that the options parameter for
g_mime_parser_construct_message() is "nullable" since upstream commit d0ebdd2ea3e6fa635a2a551c846e9bc8b6040353 (which itself precedes GMime
3.0).
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
gmime-cleanup: pass NULL arguments explicitly where GMime 3.0 expects it
Several GMime 2.6 functions sprouted a change in the argument order in
GMime 3.0. We had a compatibility layer here to be able to handle
compiling against both GMime 2.6 and 3.0. Now that we're using 3.0
only, rip out the compatibility layer for those functions with changed
argument lists, and explicitly use the 3.0 argument lists.
Signed-off-by: Daniel Kahn Gillmor <dkg@fifthhorseman.net>
projects / notmuch / log