# Set several defaults (optionally specified by the user in
# environment variables)
-CC=${CC:-gcc}
-CXX=${CXX:-g++}
-CFLAGS=${CFLAGS:--O2}
+CC=${CC:-cc}
+CXX=${CXX:-c++}
+CFLAGS=${CFLAGS:--g -O2}
CPPFLAGS=${CPPFLAGS:-}
CXXFLAGS=${CXXFLAGS:-\$(CFLAGS)}
LDFLAGS=${LDFLAGS:-}
errors=$((errors + 1))
fi
+if ! pkg-config --exists zlib; then
+ ${CC} ${zlib_cflags} -o compat/gen_zlib_pc \
+ "$srcdir"/compat/gen_zlib_pc.c ${zlib_ldflags} > /dev/null 2>&1 &&
+ compat/gen_zlib_pc > compat/zlib.pc &&
+ PKG_CONFIG_PATH="$PKG_CONFIG_PATH":compat &&
+ export PKG_CONFIG_PATH
+ rm -f compat/gen_zlib_pc
+fi
+
+printf "Checking for zlib (>= 1.2.5.2)... "
+have_zlib=0
+if pkg-config --atleast-version=1.2.5.2 zlib; then
+ printf "Yes.\n"
+ have_zlib=1
+ zlib_cflags=$(pkg-config --cflags zlib)
+ zlib_ldflags=$(pkg-config --libs zlib)
+else
+ printf "No.\n"
+ errors=$((errors + 1))
+fi
+
printf "Checking for talloc development files... "
if pkg-config --exists talloc; then
printf "Yes.\n"
errors=$((errors + 1))
fi
+printf "Checking for python... "
+have_python=0
+
+for name in python python2 python3; do
+ if command -v $name > /dev/null; then
+ have_python=1
+ python=$name
+ printf "Yes ($name).\n"
+ break
+ fi
+done
+
+if [ $have_python -eq 0 ]; then
+ printf "No.\n"
+ errors=$((errors + 1))
+fi
+
printf "Checking for valgrind development files... "
if pkg-config --exists valgrind; then
printf "Yes.\n"
have_emacs=0
fi
+printf "Checking if doxygen is available... "
+if command -v doxygen > /dev/null; then
+ printf "Yes.\n"
+ have_doxygen=1
+else
+ printf "No (so will not install api docs)\n"
+ have_doxygen=0
+fi
+
printf "Checking if sphinx is available and supports nroff output... "
-if hash sphinx-build > /dev/null 2>&1 && python -m sphinx.writers.manpage > /dev/null 2>&1 ; then
+if command -v sphinx-build > /dev/null && ${python} -m sphinx.writers.manpage > /dev/null 2>&1 ; then
printf "Yes.\n"
have_sphinx=1
- have_rst2man=0
else
- printf "No (falling back to rst2man).\n"
+ printf "No (so will not install man pages).\n"
have_sphinx=0
-
- printf "Checking if rst2man is available... "
- if rst2man -V > /dev/null 2>&1; then
- printf "Yes.\n"
- have_rst2man=1
- else
- printf "No (so will not install man pages).\n"
- have_rst2man=0
- fi
fi
libdir_in_ldconfig=0
notmuch:
EOF
+ if [ $have_python -eq 0 ]; then
+ echo " python interpreter"
+ fi
if [ $have_xapian -eq 0 ]; then
echo " Xapian library (including development files such as headers)"
echo " http://xapian.org/"
fi
+ if [ $have_zlib -eq 0 ]; then
+ echo " zlib library (>= version 1.2.5.2, including development files such as headers)"
+ echo " http://zlib.net/"
+ echo
+ fi
if [ $have_gmime -eq 0 ]; then
echo " Either GMime 2.4 library" $GMIME_24_VERSION_CTR "or GMime 2.6 library" $GMIME_26_VERSION_CTR
echo " (including development files such as headers)"
On Debian and similar systems:
- sudo apt-get install libxapian-dev libgmime-2.6-dev libtalloc-dev
+ sudo apt-get install libxapian-dev libgmime-2.6-dev libtalloc-dev zlib1g-dev
Or on Fedora and similar systems:
- sudo yum install xapian-core-devel gmime-devel libtalloc-devel
+ sudo yum install xapian-core-devel gmime-devel libtalloc-devel zlib-devel
On other systems, similar commands can be used, but the details of the
package names may be different.
exit 1
fi
+printf "Checking for canonicalize_file_name... "
+if ${CC} -o compat/have_canonicalize_file_name "$srcdir"/compat/have_canonicalize_file_name.c > /dev/null 2>&1
+then
+ printf "Yes.\n"
+ have_canonicalize_file_name=1
+else
+ printf "No (will use our own instead).\n"
+ have_canonicalize_file_name=0
+fi
+rm -f compat/have_canonicalize_file_name
+
+
printf "Checking for getline... "
if ${CC} -o compat/have_getline "$srcdir"/compat/have_getline.c > /dev/null 2>&1
then
rm -f minimal minimal.c
-cat <<EOF
-
-All required packages were found. You may now run the following
-commands to compile and install notmuch:
-
- make
- sudo make install
-
-EOF
-
# construct the Makefile.config
cat > Makefile.config <<EOF
# This Makefile.config was automatically generated by the ./configure
# Flags to enable warnings when using the C compiler
WARN_CFLAGS=${WARN_CFLAGS}
+# Name of python interpreter
+PYTHON = ${python}
+
# The prefix to which notmuch should be installed
# Note: If you change this value here, be sure to ensure that the
# LIBDIR_IN_LDCONFIG value below is still set correctly.
# Whether there's a sphinx-build binary available for building documentation
HAVE_SPHINX=${have_sphinx}
-# Whether there's a rst2man binary available for building documentation
-HAVE_RST2MAN=${have_rst2man}
+# Whether there's a doxygen binary available for building api documentation
+HAVE_DOXYGEN=${have_doxygen}
# The directory to which desktop files should be installed
desktop_dir = \$(prefix)/share/applications
# The directory to which zsh completions files should be installed
zsh_completion_dir = ${ZSHCOMLETIONDIR:=\$(prefix)/share/zsh/functions/Completion/Unix}
+# Whether the canonicalize_file_name function is available (if not, then notmuch will
+# build its own version)
+HAVE_CANONICALIZE_FILE_NAME = ${have_canonicalize_file_name}
+
# Whether the getline function is available (if not, then notmuch will
# build its own version)
HAVE_GETLINE = ${have_getline}
GMIME_CFLAGS = ${gmime_cflags}
GMIME_LDFLAGS = ${gmime_ldflags}
+# Flags needed to compile and link against zlib
+ZLIB_CFLAGS = ${zlib_cflags}
+ZLIB_LDFLAGS = ${zlib_ldflags}
+
# Flags needed to compile and link against talloc
TALLOC_CFLAGS = ${talloc_cflags}
TALLOC_LDFLAGS = ${talloc_ldflags}
# Combined flags for compiling and linking against all of the above
CONFIGURE_CFLAGS = -DHAVE_GETLINE=\$(HAVE_GETLINE) \$(GMIME_CFLAGS) \\
+ -DHAVE_CANONICALIZE_FILE_NAME=\$(HAVE_CANONICALIZE_FILE_NAME) \\
+ \$(ZLIB_CFLAGS) \\
\$(TALLOC_CFLAGS) -DHAVE_VALGRIND=\$(HAVE_VALGRIND) \\
\$(VALGRIND_CFLAGS) \\
-DHAVE_STRCASESTR=\$(HAVE_STRCASESTR) \\
-DUTIL_BYTE_ORDER=\$(UTIL_BYTE_ORDER)
CONFIGURE_CXXFLAGS = -DHAVE_GETLINE=\$(HAVE_GETLINE) \$(GMIME_CFLAGS) \\
+ -DHAVE_CANONICALIZE_FILE_NAME=\$(HAVE_CANONICALIZE_FILE_NAME) \\
+ \$(ZLIB_CFLAGS) \\
\$(TALLOC_CFLAGS) -DHAVE_VALGRIND=\$(HAVE_VALGRIND) \\
\$(VALGRIND_CFLAGS) \$(XAPIAN_CXXFLAGS) \\
-DHAVE_STRCASESTR=\$(HAVE_STRCASESTR) \\
-DHAVE_XAPIAN_COMPACT=\$(HAVE_XAPIAN_COMPACT) \\
-DUTIL_BYTE_ORDER=\$(UTIL_BYTE_ORDER)
-CONFIGURE_LDFLAGS = \$(GMIME_LDFLAGS) \$(TALLOC_LDFLAGS) \$(XAPIAN_LDFLAGS)
+CONFIGURE_LDFLAGS = \$(GMIME_LDFLAGS) \$(TALLOC_LDFLAGS) \$(ZLIB_LDFLAGS) \$(XAPIAN_LDFLAGS)
+EOF
+
+# construct the sh.config
+cat > sh.config <<EOF
+# This sh.config was automatically generated by the ./configure
+# script of notmuch.
+
+# Whether the Xapian version in use supports compaction
+NOTMUCH_HAVE_XAPIAN_COMPACT=${have_xapian_compact}
+
+# do we have man pages?
+NOTMUCH_HAVE_MAN=$((have_sphinx))
+
+# Name of python interpreter
+NOTMUCH_PYTHON=${python}
+EOF
+
+# Finally, after everything configured, inform the user how to continue.
+cat <<EOF
+
+All required packages were found. You may now run the following
+commands to compile and install notmuch:
+
+ make
+ sudo make install
+
EOF
projects / notmuch / blobdiff