interface. See http://notmuchmail.org for more about alternate
interfaces to notmuch.
.SH COMMANDS
-All commands need to know where your mail (and the notmuch database)
-are stored. This is ${HOME}/mail by default. An alternate location can
-be specified with the
-.B NOTMUCH_BASE
-environment variable.
-
The
-.BR setup " and " new
-commands are used to add new mail messages to the notmuch database.
+.BR setup
+command is used to configure Notmuch for first use, (or to reconfigure
+it later).
.RS 4
.TP 4
.B setup
Interactively sets up notmuch for first use.
-The setup command will prompt for the directory containing your email
-archives, and will then proceed to build a database that indexes the
-mail to allow for fast search of the archive.
-
-This directory can contain any number of sub-directories and should
-primarily contain only files with indvidual email messages
-(eg. maildir or mh archives are perfect). If there are other,
-non-email files (such as indexes maintained by other email programs)
-then notmuch will do its best to detect those and ignore them.
+The setup command will prompt for your full name, your primary email
+address, any alternate email addresses you use, and the directory
+containing your email archives. Your answers will be written to a
+configuration file in ${NOTMUCH_CONFIG} (if set) or
+${HOME}/.notmuch-config . This configuration file will be created with
+descriptive comments, making it easy to edit by hand later to change the
+configuration. Or you can run
+.B "notmuch setup"
+again to change the configuration.
+
+The mail directory you specify can contain any number of
+sub-directories and should primarily contain only files with individual
+email messages (eg. maildir or mh archives are perfect). If there are
+other, non-email files (such as indexes maintained by other email
+programs) then notmuch will do its best to detect those and ignore
+them.
Mail storage that uses mbox format, (where one mbox file contains many
messages), will not work with notmuch. If that's how your mail is
currently stored, it is recommended you first convert it to maildir
format with a utility such as mb2md before running
-.BR "notmuch setup" .
+.B "notmuch setup" .
Invoking
.B notmuch
with no command argument will run
.B setup
if the setup command has not previously been completed.
+.RE
-.TP
+The
+.B new
+command is used to incorporate new mail into the notmuch database.
+.RS 4
+.TP 4
.B new
Find and import any new messages to the database.
The
.B new
-command scans all sub-directories of the database, adding new messages
-that are found. Each new message will automatically be tagged with
-both the
-.BR inbox and unread
+command scans all sub-directories of the database, performing
+full-text indexing on new messages that are found. Each new message
+will automatically be tagged with both the
+.BR inbox " and " unread
tags.
-Note:
-.B notmuch new
-will skip any read-only directories, so you can use that to mark
-directories that will not receive any new mail (and make
-.B notmuch new
-faster).
+You should run
+.B "notmuch new"
+once after first running
+.B "notmuch setup"
+to create the initial database. The first run may take a long time if
+you have a significant amount of mail (several hundred thousand
+messages or more). Subsequently, you should run
+.B "notmuch new"
+whenever new mail is delivered and you wish to incorporate it into the
+database. These subsequent runs will be much quicker than the initial
+run.
+
+Invoking
+.B notmuch
+with no command argument will run
+.B new
+if
+.B "notmuch setup"
+has previously been completed, but
+.B "notmuch new"
+has not previously been run.
.RE
+Several of the notmuch commands accept search terms with a common
+syntax. See the
+.B "SEARCH SYNTAX"
+section below for more details on the supported syntax.
+
The
.BR search " and "show
commands are used to query the email database.
.RS 4
.TP 4
-.BR search " <search-term>..."
+.BR search " [options...] <search-term>..."
Search for messages matching the given search terms, and display as
results the threads containing the matched messages.
The output consists of one line per thread, giving a thread ID, the
-date of the oldest matched message in the thread, and the subject from
-that message.
-
-Currently, in addition to free text (and quoted phrases) which match
-terms appearing anywhere within an email, the following prefixes can
-be used to search specific portions of an email, (where <brackets>
-indicate user-supplied values):
-
- from:<name-or-address>
-
- to:<name-or-address>
-
- subject:<word-or-quoted-phrase>
-
- tag:<tag>
-
- id:<message-id>
-
- thread:<thread-id>
+date of the newest (or oldest, depending on the sort option) matched
+message in the thread, the number of matched messages and total
+messages in the thread, the names of all participants in the thread,
+and the subject of the newest (or oldest) message.
-The from: prefix is used to match the name or address of the sender of
-an email message.
+Supported options for
+.B search
+include
+.RS 4
+.TP 4
+.BR \-\-sort= ( newest\-first | oldest\-first )
-The to: prefix is used to match the names or addresses of any
-recipient of an email message, (whether To, Cc, or Bcc).
+This option can be used to present results in either chronological order
+.RB ( oldest\-first )
+or reverse chronological order
+.RB ( newest\-first ).
-Any term prefixed with subject: will match only text from
-the subject of an email. Quoted phrases are supported when
-searching with: subject:\"this is a phrase\".
+Note: The thread order will be distinct between these two options
+(beyond being simply reversed). When sorting by
+.B oldest\-first
+the threads will be sorted by the oldest message in each thread, but
+when sorting by
+.B newest\-first
+the threads will be sorted by the newest message in each thread.
-Valid tag values include
-.BR inbox " and " unread
-by default for new messages added by
-.B notmuch new
-as well as any other tag values added manually with
-.BR "notmuch tag" .
+.RE
+.RS 4
+By default, results will be displayed in reverse chronological order,
+(that is, the newest results will be displayed first).
-Message ID values are the literal contents of the Message-ID: header
-of email messages, but without the '<', '>' delimiters.
+See the
+.B "SEARCH SYNTAX"
+section below for details of the supported syntax for <search-terms>.
+.RE
+.TP
+.BR show " [options...] <search-term>..."
-Thread ID values are generated internally by notmuch but can be seen
-in the first column of output from
-.B notmuch search
-for example.
+Shows all messages matching the search terms.
-In addition to individual terms, multiple terms can be
-combined with Boolean operators (
-.BR and ", " or ", " not
-, etc.). each term in the query will be implicitly connected by a
-logical AND if no explicit operator is provided, (except that terms
-with a common prefix will be implicitly combined with OR until we get
-Xapian defect #402 fixed).
+The messages will be grouped and sorted based on the threading (all
+replies to a particular message will appear immediately after that
+message in date order). The output is not indented by default, but
+depth tags are printed so that proper indentation can be performed by
+a post-processor (such as the emacs interface to notmuch).
-Parentheses can also be used to control the combination of the Boolean
-operators, but will have to be protected from interpretation by the
-shell, (such as by putting quotation marks around any parenthesized
-expression).
-.TP
-.BR show " <search-term>..."
+Supported options for
+.B show
+include
+.RS 4
+.TP 4
+.B \-\-entire\-thread
-Shows all messages matching the search terms.
+By default only those messages that match the search terms will be
+displayed. With this option, all messages in the same thread as any
+matched message will be displayed.
+.RE
-See the documentation of
-.B search
-for details of the supported syntax of search terms.
+.RS 4
+The output format is plain-text, with all text-content MIME parts
+decoded. Various components in the output,
+.RB ( message ", " header ", " body ", " attachment ", and MIME " part ),
+will be delimited by easily-parsed markers. Each marker consists of a
+Control-L character (ASCII decimal 12), the name of the marker, and
+then either an opening or closing brace, ('{' or '}'), to either open
+or close the component.
A common use of
.B notmuch show
.B notmuch search
command.
-All messages will be displayed in date order. The output format is
-plain-text, with all text-content MIME parts decoded. Various
-components in the output,
-.RB ( message ", " header ", " body ", " attachment ", and MIME " part ),
-will be delimited by easily-parsed markers. Each marker consists of a
-Control-L character (ASCII decimal 12), the name of the marker, and
-then either an opening or closing brace, ('{' or '}'), to either open
-or close the component.
+See the
+.B "SEARCH SYNTAX"
+section below for details of the supported syntax for <search-terms>.
+.RE
+.RE
+
+The
+.B reply
+command is useful for preparing a template for an email reply.
+.RS 4
+.TP 4
+.BR reply " [options...] <search-term>..."
+
+Constructs a reply template for a set of messages.
+
+To make replying to email easier,
+.B notmuch reply
+takes an existing set of messages and constructs a suitable mail
+template. The Reply-to header (if any, otherwise From:) is used for
+the To: address. Vales from the To: and Cc: headers are copied, but
+not including any of the current user's email addresses (as configured
+in primary_mail or other_email in the .notmuch-config file) in the
+recipient list
+
+It also builds a suitable new subject, including Re: at the front (if
+not already present), and adding the message IDs of the messages being
+replied to to the References list and setting the In-Reply-To: field
+correctly.
+
+Finally, the original contents of the emails are quoted by prefixing
+each line with '> ' and included in the body.
+
+The resulting message template is output to stdout.
+
+Supported options for
+.B reply
+include
+.RS
+.TP 4
+.BR \-\-format= ( default | headers\-only )
+.RS
+.TP 4
+.BR default
+Includes subject and quoted message body.
+.TP
+.BR headers-only
+Only produces In-Reply-To, References, To, Cc, and Bcc headers.
+.RE
+
+See the
+.B "SEARCH SYNTAX"
+section below for details of the supported syntax for <search-terms>.
+
+Note: It is most common to use
+.B "notmuch reply"
+with a search string matching a single message, (such as
+id:<message-id>), but it can be useful to reply to several messages at
+once. For example, when a series of patches are sent in a single
+thread, replying to the entire thread allows for the reply to comment
+on issue found in multiple patches.
+.RE
.RE
The
Add/remove tags for all messages matching the search terms.
-The search terms are handled exactly as in
-.B "notmuch search"
-so one can use that command first to see what will be modified.
-
Tags prefixed by '+' are added while those prefixed by '-' are
-removed. For each message, tag removal is before tag addition.
+removed. For each message, tag removal is performed before tag
+addition.
The beginning of <search-terms> is recognized by the first
argument that begins with neither '+' nor '-'. Support for
by allowing the user to specify a "--" argument to separate
the tags from the search terms.
-Caution: If you run
-.B "notmuch new"
-between reading a thread with
-.B "notmuch show"
-and removing the "inbox" tag for that thread with
-.B "notmuch tag"
-then you create the possibility of moving some messages from that
-thread out of your inbox without ever reading them. The easiest way to
-avoid this problem is to not run
-.B "notmuch new"
-between reading mail and removing tags.
+See the
+.B "SEARCH SYNTAX"
+section below for details of the supported syntax for <search-terms>.
.RE
The
.B "notmuch restore"
command provides you a way to import all of your tags (or labels as
sup calls them).
-.SH ENVIRONMENT
-.B NOTMUCH_BASE
-Set to the directory which contains the user's mail to be indexed and
-searched by notmuch. Notmuch will create a directory named
-.B .notmuch
-at the toplevel of this directory where it will store its database.
+.SH SEARCH SYNTAX
+Several notmuch commands accept a common syntax for search terms.
+
+The search terms can consist of free-form text (and quoted phrases)
+which will match all messages that contain all of the given
+terms/phrases in the body, the subject, or any of the sender or
+recipient headers.
+
+In addition to free text, the following prefixes can be used to force
+terms to match against specific portions of an email, (where
+<brackets> indicate user-supplied values):
+
+ from:<name-or-address>
+
+ to:<name-or-address>
+
+ subject:<word-or-quoted-phrase>
+
+ attachment:<word>
+
+ tag:<tag>
+
+ id:<message-id>
+
+ thread:<thread-id>
+
+The
+.B from:
+prefix is used to match the name or address of the sender of an email
+message.
+
+The
+.B to:
+prefix is used to match the names or addresses of any recipient of an
+email message, (whether To, Cc, or Bcc).
+
+Any term prefixed with
+.B subject:
+will match only text from the subject of an email. Searching for a
+phrase in the subject is supported by including quotation marks around
+the phrase, immediately following
+.BR subject: .
+
+The
+.B attachment:
+prefix can be used to search for specific filenames (or extensions) of
+attachments to email messages.
+
+For
+.BR tag: ,
+valid tag values include
+.BR inbox " and " unread
+by default for new messages added by
+.B notmuch new
+as well as any other tag values added manually with
+.BR "notmuch tag" .
+
+For
+.BR id: ,
+message ID values are the literal contents of the Message-ID: header
+of email messages, but without the '<', '>' delimiters.
+
+The
+.B thread:
+prefix can be used with the thread ID values that are generated
+internally by notmuch (and do not appear in email messages). These
+thread ID values can be seen in the first column of output from
+.B "notmuch search"
+
+In addition to individual terms, multiple terms can be
+combined with Boolean operators (
+.BR and ", " or ", " not
+, etc.). Each term in the query will be implicitly connected by a
+logical AND if no explicit operator is provided, (except that terms
+with a common prefix will be implicitly combined with OR until we get
+Xapian defect #402 fixed).
+
+Parentheses can also be used to control the combination of the Boolean
+operators, but will have to be protected from interpretation by the
+shell, (such as by putting quotation marks around any parenthesized
+expression).
+
+Finally, results can be restricted to only messages within a
+particular time range, (based on the Date: header) with a syntax of:
+
+ <intial-timestamp>..<final-timestamp>
+
+Each timestamp is a number representing the number of seconds since
+1970-01-01 00:00:00 UTC. This is not the most convenient means of
+expressing date ranges, but until notmuch is fixed to accept a more
+convenient form, one can use the date program to construct
+timestamps. For example, with the bash shell the folowing syntax would
+specify a date range to return messages from 2009-10-01 until the
+current time:
+
+ $(date +%s -d 2009-10-01)..$(date +%s)
.SH SEE ALSO
The emacs-based interface to notmuch (available as
.B notmuch.el
The notmuch website:
.B http://notmuchmail.org
+.SH CONTACT
+Feel free to send questions, comments, or kudos to the notmuch mailing
+list <notmuch@notmuchmail.org> . Subscription is not required before
+posting, but is available from the notmuchmail.org website.
+
+Real-time interaction with the Notmuch community is available via IRC
+(server: irc.freenode.net, channel: #notmuch).
projects / notmuch / blobdiff