# Make sure echo builtin does not expand backslash-escape sequences by default.
shopt -u xpg_echo
+# Ensure NOTMUCH_SRCDIR and NOTMUCH_BUILDDIR are set.
+. $(dirname "$0")/export-dirs.sh || exit 1
+
+# It appears that people try to run tests without building...
+if [[ ! -x "$NOTMUCH_BUILDDIR/notmuch" ]]; then
+ echo >&2 'You do not seem to have built notmuch yet.'
+ exit 1
+fi
+
this_test=${0##*/}
this_test=${this_test%.sh}
this_test_bare=${this_test#T[0-9][0-9][0-9]-}
# For emacsclient
unset ALTERNATE_EDITOR
+add_gnupg_home ()
+{
+ local output
+ [ -d ${GNUPGHOME} ] && return
+ _gnupg_exit () { gpgconf --kill all 2>/dev/null || true; }
+ at_exit_function _gnupg_exit
+ mkdir -m 0700 "$GNUPGHOME"
+ gpg --no-tty --import <$TEST_DIRECTORY/gnupg-secret-key.asc >"$GNUPGHOME"/import.log 2>&1
+ test_debug "cat $GNUPGHOME/import.log"
+ if (gpg --quick-random --version >/dev/null 2>&1) ; then
+ echo quick-random >> "$GNUPGHOME"/gpg.conf
+ elif (gpg --debug-quick-random --version >/dev/null 2>&1) ; then
+ echo debug-quick-random >> "$GNUPGHOME"/gpg.conf
+ fi
+ echo no-emit-version >> "$GNUPGHOME"/gpg.conf
+}
+
# Each test should start with something like this, after copyright notices:
#
# test_description='Description of this test...
trap 'trap_exit' EXIT
trap 'trap_signal' HUP INT TERM
-# Generate a new message in the mail directory, with a unique message
-# ID and subject. The message is not added to the index.
-#
-# After this function returns, the filename of the generated message
-# is available as $gen_msg_filename and the message ID is available as
-# $gen_msg_id .
-#
-# This function supports named parameters with the bash syntax for
-# assigning a value to an associative array ([name]=value). The
-# supported parameters are:
-#
-# [dir]=directory/of/choice
-#
-# Generate the message in directory 'directory/of/choice' within
-# the mail store. The directory will be created if necessary.
-#
-# [filename]=name
-#
-# Store the message in file 'name'. The default is to store it
-# in 'msg-<count>', where <count> is three-digit number of the
-# message.
-#
-# [body]=text
-#
-# Text to use as the body of the email message
-#
-# '[from]="Some User <user@example.com>"'
-# '[to]="Some User <user@example.com>"'
-# '[subject]="Subject of email message"'
-# '[date]="RFC 822 Date"'
-#
-# Values for email headers. If not provided, default values will
-# be generated instead.
-#
-# '[cc]="Some User <user@example.com>"'
-# [reply-to]=some-address
-# [in-reply-to]=<message-id>
-# [references]=<message-id>
-# [content-type]=content-type-specification
-# '[header]=full header line, including keyword'
-#
-# Additional values for email headers. If these are not provided
-# then the relevant headers will simply not appear in the
-# message.
-#
-# '[id]=message-id'
-#
-# Controls the message-id of the created message.
-gen_msg_cnt=0
-gen_msg_filename=""
-gen_msg_id=""
-generate_message ()
-{
- # This is our (bash-specific) magic for doing named parameters
- local -A template="($@)"
- local additional_headers
-
- gen_msg_cnt=$((gen_msg_cnt + 1))
- if [ -z "${template[filename]}" ]; then
- gen_msg_name="msg-$(printf "%03d" $gen_msg_cnt)"
- else
- gen_msg_name=${template[filename]}
- fi
-
- if [ -z "${template[id]}" ]; then
- gen_msg_id="${gen_msg_name%:2,*}@notmuch-test-suite"
- else
- gen_msg_id="${template[id]}"
- fi
-
- if [ -z "${template[dir]}" ]; then
- gen_msg_filename="${MAIL_DIR}/$gen_msg_name"
- else
- gen_msg_filename="${MAIL_DIR}/${template[dir]}/$gen_msg_name"
- mkdir -p "$(dirname "$gen_msg_filename")"
- fi
-
- if [ -z "${template[body]}" ]; then
- template[body]="This is just a test message (#${gen_msg_cnt})"
- fi
-
- if [ -z "${template[from]}" ]; then
- template[from]="Notmuch Test Suite <test_suite@notmuchmail.org>"
- fi
-
- if [ -z "${template[to]}" ]; then
- template[to]="Notmuch Test Suite <test_suite@notmuchmail.org>"
- fi
-
- if [ -z "${template[subject]}" ]; then
- if [ -n "$test_subtest_name" ]; then
- template[subject]="$test_subtest_name"
- else
- template[subject]="Test message #${gen_msg_cnt}"
- fi
- elif [ "${template[subject]}" = "@FORCE_EMPTY" ]; then
- template[subject]=""
- fi
-
- if [ -z "${template[date]}" ]; then
- # we use decreasing timestamps here for historical reasons;
- # the existing test suite when we converted to unique timestamps just
- # happened to have signicantly fewer failures with that choice.
- local date_secs=$((978709437 - gen_msg_cnt))
- # printf %(..)T is bash 4.2+ feature. use perl fallback if needed...
- TZ=UTC printf -v template[date] "%(%a, %d %b %Y %T %z)T" $date_secs 2>/dev/null ||
- template[date]=`perl -le 'use POSIX "strftime";
- @time = gmtime '"$date_secs"';
- print strftime "%a, %d %b %Y %T +0000", @time'`
- fi
-
- additional_headers=""
- if [ ! -z "${template[header]}" ]; then
- additional_headers="${template[header]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[reply-to]}" ]; then
- additional_headers="Reply-To: ${template[reply-to]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[in-reply-to]}" ]; then
- additional_headers="In-Reply-To: ${template[in-reply-to]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[cc]}" ]; then
- additional_headers="Cc: ${template[cc]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[bcc]}" ]; then
- additional_headers="Bcc: ${template[bcc]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[references]}" ]; then
- additional_headers="References: ${template[references]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[content-type]}" ]; then
- additional_headers="Content-Type: ${template[content-type]}
-${additional_headers}"
- fi
-
- if [ ! -z "${template[content-transfer-encoding]}" ]; then
- additional_headers="Content-Transfer-Encoding: ${template[content-transfer-encoding]}
-${additional_headers}"
- fi
-
- # Note that in the way we're setting it above and using it below,
- # `additional_headers' will also serve as the header / body separator
- # (empty line in between).
-
- cat <<EOF >"$gen_msg_filename"
-From: ${template[from]}
-To: ${template[to]}
-Message-Id: <${gen_msg_id}>
-Subject: ${template[subject]}
-Date: ${template[date]}
-${additional_headers}
-${template[body]}
-EOF
-}
-
-# Generate a new message and add it to the database.
-#
-# All of the arguments and return values supported by generate_message
-# are also supported here, so see that function for details.
-add_message ()
-{
- generate_message "$@" &&
- notmuch new > /dev/null
-}
-
# Deliver a message with emacs and add it to the database
#
# Uses emacs to generate and deliver a message to the mail store.
if [ -d $TEST_DIRECTORY/corpora.mail/$corpus ]; then
cp -a $TEST_DIRECTORY/corpora.mail/$corpus ${MAIL_DIR}
else
- cp -a $TEST_DIRECTORY/corpora/$corpus ${MAIL_DIR}
+ cp -a $NOTMUCH_SRCDIR/test/corpora/$corpus ${MAIL_DIR}
notmuch new >/dev/null || die "'notmuch new' failed while adding email corpus"
mkdir -p $TEST_DIRECTORY/corpora.mail
cp -a ${MAIL_DIR} $TEST_DIRECTORY/corpora.mail/$corpus
# The test suite forces LC_ALL=C, but this causes Python 3 to
# decode stdin as ASCII. We need to read JSON in UTF-8, so
# override Python's stdio encoding defaults.
- output=$(echo "$1" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
+ local script='import json, sys; json.dump(json.load(sys.stdin), sys.stdout, sort_keys=True, indent=4)'
+ output=$(echo "$1" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -c "$script" \
|| echo "$1")
- expected=$(echo "$2" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -mjson.tool \
+ expected=$(echo "$2" | PYTHONIOENCODING=utf-8 $NOTMUCH_PYTHON -c "$script" \
|| echo "$2")
shift 2
test_expect_equal "$output" "$expected" "$@"
notmuch dump --include=tags "${@}" | sed '/^#/d' | sort
}
+notmuch_drop_mail_headers ()
+{
+ $NOTMUCH_PYTHON -c '
+import email, sys
+msg = email.message_from_file(sys.stdin)
+for hdr in sys.argv[1:]: del msg[hdr]
+print(msg.as_string(False))
+' "$@"
+}
+
notmuch_search_sanitize ()
{
perl -pe 's/("?thread"?: ?)("?)................("?)/\1\2XXX\3/'
# --load Force loading of notmuch.el and test-lib.el
exec ${TEST_EMACS} --quick \
- --directory "$TEST_DIRECTORY/../emacs" --load notmuch.el \
- --directory "$TEST_DIRECTORY" --load test-lib.el \
+ --directory "$NOTMUCH_SRCDIR/emacs" --load notmuch.el \
+ --directory "$NOTMUCH_SRCDIR/test" --load test-lib.el \
"\$@"
EOF
chmod a+x "$TMP_DIRECTORY/run_emacs"
test -z "$missing_dependencies" || return
if [ -z "$EMACS_SERVER" ]; then
- emacs_tests="${this_test_bare}.el"
- if [ -f "$TEST_DIRECTORY/$emacs_tests" ]; then
+ emacs_tests="$NOTMUCH_SRCDIR/test/${this_test_bare}.el"
+ if [ -f "$emacs_tests" ]; then
load_emacs_tests="--eval '(load \"$emacs_tests\")'"
else
load_emacs_tests=
}
test_ruby() {
- MAIL_DIR=$MAIL_DIR ruby -I $TEST_DIRECTORY/../bindings/ruby> OUTPUT
+ MAIL_DIR=$MAIL_DIR ruby -I $NOTMUCH_SRCDIR/bindings/ruby> OUTPUT
}
test_C () {
exec_file="test${test_count}"
test_file="${exec_file}.c"
cat > ${test_file}
- ${TEST_CC} ${TEST_CFLAGS} -I${TEST_DIRECTORY} -I${NOTMUCH_SRCDIR}/lib -o ${exec_file} ${test_file} -L${TEST_DIRECTORY}/../lib/ -lnotmuch -ltalloc
+ ${TEST_CC} ${TEST_CFLAGS} -I${NOTMUCH_SRCDIR}/test -I${NOTMUCH_SRCDIR}/lib -o ${exec_file} ${test_file} -L${NOTMUCH_BUILDDIR}/lib/ -lnotmuch -ltalloc
echo "== stdout ==" > OUTPUT.stdout
echo "== stderr ==" > OUTPUT.stderr
./${exec_file} "$@" 1>>OUTPUT.stdout 2>>OUTPUT.stderr
}
-. ./test-lib-common.sh || exit 1
+. "$NOTMUCH_SRCDIR/test/test-lib-common.sh" || exit 1
if [ "${NOTMUCH_GMIME_MAJOR}" = 3 ]; then
test_subtest_broken_gmime_3 () {